Shut Down |
|
Cannot shut down. | Press the power button for four seconds or longer to |
| shut down the wireless display. |
Sound |
|
No sound.
Unable to hear sound in stereo.
Confirm the volume for [Quick Menu] or [Volume & Sounds] in Control Panel.
Playback conditions vary depending on the server.
•If you are connecting through Microsoft® Remote Desktop Connection or a web server, you will hear monaural sound even if the original sound is stereo.
•For playback conditions when connecting through Cit- rix® Presentation Server 4.0, refer to the Citrix man- ual for details.
Wireless Communication
Cannot connect to | Check the network settings. |
network. | You may experience interference with other wireless |
| LAN access points. |
| Verify that each wireless LAN access point is set to a |
| different channel. |
Connecting Peripherals
The connected key- board and mouse do not work.
Check the keyboard and mouse connection.
The device con- nected to the serial port does not work.
Check the connection.
The device driver may not work. Refer to the instruction manual of the device.
Do not connect two mouse devices simultaneously.
Cannot print. | Check the printer connection. |
| Turn on the printer. |
| The printer is not online. |
| No paper is in the printer tray or there is a paper jam. |
| Turn on the printer and connect it to the wireless dis- |
| play, and then turn on the wireless display. |
Others |
|
No response. | The screen content may not display correctly due to |
| poor signal quality. In such case, move to a place where |
| signal quality is good then make a connection. |
| Press the power button for four seconds or longer to |
| shut down the wireless display, and then press the |
| power button to turn it on. |