Meridian Data 16i manual Loosening the Retention Screws from the BBU Module

SecurStor 16i Installation and Hardware Reference Manual

Figure 5-1: Loosening the Retention Screws from the BBU Module

Step 6. Loosen the retention screws from controller. Use a medium-size Phillips screwdriver to remove the screws underneath each of the ejection levers. Keep the screws for future use.

Figure 5-2: Loosening the Retention Screws from the Controller Module

Step 7. Disconnect all cables from the controller module. These include the cables connecting to host or cascaded subsystems, and any cables connecting the COM ports.

Step 8. Remove the controller module by pressing down the two ejection levers. The controller will automatically be eased out of the module bay. Gently pull the controller module out of the subsystem with one hand underneath to support the weight of the module.

5-4