Meridian Data 16i manual Subsystem Monitoring

SecurStor 16i Installation and Hardware Reference Manual

CHAPTER 3 SUBSYSTEM MONITORING

3.1	SUBSYSTEM MONITORING OVERVIEW	3-1
3.2	STATUS-INDICATINGLEDS	3-2
3.2.1 Brief Overview of the LEDs		3-2
3.2.2	Drive Tray LEDs	3-2
3.2.3	Controller Module LEDs	3-3
Restore NVRAM Defaults – a Push Button		3-4
3.2.4	Ethernet Port LEDs	3-5
3.2.5	BBU Module LED	3-6
3.2.6	PSU LEDs	3-6
3.2.7	Cooling Module LEDs	3-7
3.3	AUDIBLE ALARM	3-8
3.3.1	Default Threshold Values	3-8
3.3.2	Failed Devices	3-9
3.4	I2C MONITORING	3-9

CHAPTER 4 SUBSYSTEM CONNECTION AND OPERATION

4.1	CONNECTION OVERVIEW	4-1
4.1.1	Cabling	4-1
4.1.2	Network Topologies	4-2
4.1.3	Points of Failure	4-2
4.2	HOST CONNECTION TOPOLOGIES	4-2
4.2.1 Sample Topology – Direct-Attached,Dual-path Connection		4-2
4.3	POWER ON	4-5
4.3.1	Check List	4-6
4.3.2	Power On Procedure	4-6
4.3.3	Power On Enclosure	4-6
4.3.4 Power On Status Check		4-7
4.4	POWER OFF PROCEDURE	4-8

CHAPTER 5 SUBSYSTEM MAINTENANCE AND UPGRADING

5.1	OVERVIEW	5-1
5.1.1	Maintenance	5-1
5.1.2 General Notes on Component Replacement		5-1
5.2	REPLACING CONTROLLER MODULE COMPONENTS	5-2
5.2.1	Overview	5-2
5.2.2 Notes on Controller Module Maintenance		5-3
5.2.3 Removing the Controller Module		5-3
5.2.4 Replacing the Controller Module		5-5
5.3	REPLACING OR UPGRADING MEMORY MODULES	5-6
5.3.1 Memory Module Installation Overview		5-6
5.3.2 Selecting the Memory Modules		5-6
5.3.3	DIMM Module Installation	5-7
5.4	REPLACING A FAULTY BBU	5-8
5.4.1 BBU Warnings and Precautions		5-9
5.4.2 Replacing a Faulty BBU		5-9
5.5	REPLACING A FAILED PSU MODULE	5-12
5.5.1 Notes on PSU Module Maintenance		5-12
5.5.2 Replacing the PSU Module		5-13
5.6	COOLING MODULE MAINTENANCE	5-15
5.6.1 Notes on Cooling Module Maintenance		5-15
5.6.2 Replacing a Cooling Module		5-16
5.7	REPLACING A FAILED HARD DRIVE	5-18
5.7.1 Hard Drive Maintenance Overview		5-18
5.7.2 Replacing a Hard Drive		5-19

ix