Work path – specifies a working directory that the translator uses for temporary storage, debug output etc for this translation type. The process must have write, file create and directory create access to this directory. Each translation in a configuration files must specify a different work path. Several subdirectories are created in the work path for use by the translator:.
Number of seconds to wait before rechecking the input path, when determining whether files are stable and ready for translation. This value is optional; if not supplied, the delay time specified in the command line
For the
c:\trans\work
instead of
c:\trans\work\
Table 7-1 – Translation Formats
Name | Format | Read | Write |
ADAC | ADAC (Pegasys) | Yes | Yes |
|
|
|
|
DICOM | DICOM (ACR NEMA) | Yes | Yes |
|
|
|
|
ECLIPSE | Eclipse | Yes | Yes |
|
|
|
|
GE_ELSCINT_S | GE Elscint (SBACK) | Yes | Yes |
|
|
|
|
GE_GENIE_D | GE Genie (DICOM) | Yes |
|
|
|
|
|
GE_STARCAM | GE StarCam | Yes |
|
|
|
|
|
NUMA | Numa (private) | Yes | Yes |
|
|
|
|
PICKER | Marconi (Interfile) | Yes | Yes |
|
|
|
|
SIEMENS | Siemens (ICON) |
| Yes |
|
|
|
|
SMV_IF | SMV Interfile | Yes | Yes |
|
|
|
|
SOPHA | Sopha (NXT/F83) | Yes |
|
|
|
|
|
TOHSIBA_V | Toshiba (VI/DI) | Yes |
|
|
|
|
|
For each translation type, the data flows from the specified input to the specified output path. There is no limit on the number of translation types that can be specified in a configuration file.
Page 30 of 33