Me Inc manual Removing NumaLink-3.0, License Error Message

Page 8

NumaLink-3.0™ Users Guide and Service Manual

Version: A1

Licensee: Numa, Inc — INTERNAL USE ONLY, ALL OTHER USE PROHIBITED

Expires: June 1, 2000

CHECKSUM: ++9GZCZW3J8VWSEQ9QSQNZRZCOOHT5VJPY—

Numa license ends

If an appropriate license cannot be found, a message is displayed as shown in Figure 3. Contact Numa immediately if you have any problems with your NumaLink-3.0 licenses.

Figure 3 – License Error Message

NLF_NoLicense: No valid NumaLink-3.0 license found (5)

2.2.3 Removing NumaLink-3.0

To remove NumaLink-3.0 from your system, execute the following program:

C:\Program Files\Numa\Numalink\unwise.exe

1.Select “Automatic”, press “Next”.

2.Press “Finish” to remove NumaLink-3.0.

Page 7 of 33

Image 8

Contents NumaLink-3.0 Version AprilFor more information contact Numa Table of Contents Introduction Cabling Installation and Getting StartedHardware Shutdown and Reboot StartupLicense Installation DirectoriesSoftware License Error Message Removing NumaLink-3.0Product Overview NumaLinkTypical Translation DicomPage Configuration GeneralNumaLInk-3.0 Dicom Application Entity Information Translations Translations Tab Translations Settings Customization DicomDicom dialog Dicom Settings Status NumaLink-3.0 Dicom Conformance StatementPage Technical Support Logging and Error ReportingRemote Diagnostics Troubleshooting PcAnywhere IconFrequently Asked Questions Page Page OEM Setup Information NumaLink-3.0 Input Configuration Pegasys ReadNumaLink-3.0 Output Configuration Pegasys Write Adac PegasysNumaLink-3.0 Input Configuration StarCam Read NumaLink-3.0 Input Configuration Odyssey ReadGE StarCam Marconi OdysseyNumaLink-3.0 Input Configuration Icon Read Siemens IconCommand Line Interface and Configuration File Command LineConfiguration File Translate Directive Instead Outremoteae Directive Control* Directives