Minolta CF2002 user manual Available Features, Finishing Settings, Zoom Settings

1.2 Available Features 1

Finishing Settings

Stapling

Copies are stapled together before they are fed out.

Stapling is only available if the optional finisher (FN-8 or FN-116) is installed.

Hole-punching

Holes are punched in copies before they are fed out.

Hole-punching is only available if the punch kit (PK-4) is installed in the optional finisher (FN-8).

Zoom Settings

Auto Size

This setting automatically selects the most appropriate zoom ratio based on the size of the document loaded and the specified paper size.

Full Size

This setting makes a copy that is the same size as the document (⋅ 1.000).

Enlarged copies

Zoom settings for making enlarged copies from common standard document sizes to standard paper sizes are available.

❍Example 1: A Letter-size document can be copied onto the larger 11 ⋅ 17-size paper.

❍Example 2: A Legal-size document can be copied onto the larger 11 ⋅ 17-size paper.

Reduced copies

Zoom settings for making reduced copies from common standard document siz- es to standard paper sizes are available.

❍Example 1: A Legal-size document can be copied onto the smaller Letter-size paper.

❍Example 2: An 11 ⋅ 17-size document can be copied onto the smaller Letter- size paper.

Minimal

This setting slightly reduces the copy (⋅0.930).

❍Selecting the “Minimal” setting ensures that any part of the original positioned at the edge of the page will not be cut off in the copy.

Zoom copies

Any zoom ratio (between ⋅0.250 and ⋅4.000) can be specified.

❍Touch and to specify the desired zoom ratio.

CF2002/CF3102 1-5

Before Making Copies Chapter 1