Minolta CF2002 Document Precautions Multi-Sheet Feeding, Document Precautions Manual Feeding

Page 77

Original Documents Chapter 4

	4	4.1 Document Feeding
	4

Document Precautions (Multi-Sheet Feeding)

The following types of documents should not be used, otherwise paper misfeeds or damage to the document may occur. Instead, these types of documents should be fed manually.

Rolled documents

Wrinkled or torn documents

Folded documents (folded in half or fanned)

Highly translucent or transparent documents, such as overhead transparencies or diazo photosensitive paper

Documents with binder holes (2 or 3 holes)

Documents with many binder holes, such as loose-leaf paper

Coated documents, such as heat-sensitive or carbon-backed paper

Inkjet printer paper

Documents just after printed with this copier

Document Precautions (Manual Feeding)

The following precautions should be observed when manually feeding the types of documents listed below.

Handle the documents as described.

Non-standard-sized documents

The document size cannot be detected automatically, therefore, the Paper set- ting “Auto Paper” and the Zoom setting “Auto Size” cannot be used.

❍In the Basic screen, touch [Paper], and then select the appropriate paper size setting.

For details on selecting the paper size, refer to “Selecting the Paper Setting” of “Specifying Copy Settings” (page 5-12).

Highly translucent or transparent documents, such as overhead projector transpar- encies or diazo photosensitive paper

The document size cannot be detected automatically.

❍Place a blank sheet of paper of the same size as the document over the doc- ument.

Thick objects, such as books

With thick books, the original cover, or the duplexing document feeder if it is in- stalled, cannot be closed.

❍Scan the document without closing the original cover or the duplexing docu- ment feeder.

Do not place objects exceeding 4-1/2 lbs. on the original glass. In addition, if a book is placed on the original glass, do not press it down extremely hard, other- wise the original glass may be damaged. (The original glass can withstand a weight of 4-1/2 lbs.)

4-4	CF2002/CF3102

Image 77

Contents CF2002/CF3102 Contents Interrupting a Copy Job Stopping PrintingTo interrupt copying Print AreaSelecting a Finishing Setting Selecting a Color SettingSpecifying a Zoom Setting Document FeedingSelecting a Photo/Density Setting Copy SettingsChecking the Settings To check the settings To change the settingsJob Log Screens Description of JobsJob Control Screens IndexEnlarge Display Mode Operation Guide Administrator OperationsAvailable Features Auxiliary Functions Scanning Operations Advanced OperationsBefore Making Copies Structure of the Manual IntroductionIntroduction Sorting Available FeaturesColor Settings Zoom Settings Available FeaturesFinishing Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Text Enhancement Setting Densty SettingsGlossy Mode Setting Select this setting when copying glossy imagesBefore Making Copies Chapter Making Copies Before Names of Control Panel Parts and Their FunctionsNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel To adjust the angle of the control panel Adjusting the Angle of the Control PanelAuto Panel Reset When the copier is turned onTurning the Copier On and Off To turn the copier onSleep Mode Energy Saver ModeTo recover from Energy Saver mode To recover from Sleep mode To turn the copier off When the copier is turned offTurning the Copier On and Off Description of the Touch Panel Using the Touch PanelDefault Settings Tip Using the Touch PanelStructure of the Display Settings screenBe careful not to damage the touch panel Operating the Touch PanelBefore Making Copies Chapter Basic Copy 2 Operations Making Basic Copies Procedure for making basic copies is described belowMaking Basic Copies Basic Copy Operations Chapter To make a copy that is the same size as the original Practical Copy ExamplesPractical Copy Examples To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter To stop/restart/delete a print job Job can be canceled while it is being printedStopping Printing Stopping Printing To interrupt copying Interrupting a Copy JobInterrupting a Copy Job To make a test copy Making Test Copies Copy 1 SetBasic Copy Operations Chapter To make copies when accounts are specified Making Copies Using AccountsUsing the Copy Track Function Loading Paper Paper Types Paper SpecificationsUse paper that meets the following specifications Paper Sizes Paper SpecificationsNon-standard paper Standard paperPaper feed unit and large capacity cabinet are optional Paper CapacityTypes of paper can be used Paper can be usedLoading Paper Chapter Paper output direction Print AreaPaper Storage Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawerLoading Paper Into the 1st Drawer Loading PaperLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Touch Paper Setting the Paper Size for the 1st DrawerTo set the paper size To set a non-standard custom paper size To set a paper size in metric measurementsTo store a non-standard custom paper size To select a stored non-standard custom paper size Pull out the paper drawer Press down on the paper-lifting Loading Paper Into the 2nd Drawer or a Paper Feed UnitTo set the Specialty Paper function Specialty Paper functionPull out the paper drawer Loading Paper Into the Large Capacity CabinetLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Types Document FeedingMulti-sheet feeding Plain paper Multi-sheet feeding Thick paperPossible combinations for mixed original paper sizes Mixed Originals Paper SizesDocument Precautions Manual Feeding Document Precautions Multi-Sheet FeedingMulti-Sheet Feeding Feeding the DocumentFeeding the Document Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Align the document with the docu- ment scales Manual FeedingOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings To select the Color setting Selecting a Color SettingAutomatic Sort/Non-Sort Setting Selection Selecting a Finishing SettingSelecting a Finishing Setting Crisscross Non-Sorting Non-Sort Setting Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort SettingHole-Punching Stapling with finisher FN-116 installedStapling with finisher FN-8 installed To specify Finishing settings Selecting a Finishing Setting Automatic Scaling Auto Size Setting Specifying a Zoom SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge SettingsCustom Sizing CustomZoom Setting Minimizing Minimal SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom settingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Manually Selecting the Paper SettingSelecting the Manual Bypass Tray Bypass Setting Centering Selecting the Paper SettingSmall-Sized Documents To select the Paper setting Auto Paper Source Selection FeatureOriginal Settings Selecting the Orig Copy Settings Original Set- tingsSelecting the Orig Copy Settings Original Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Copy Settings Selecting the Orig Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Specifying a Glossy Finish Glossy Mode Setting Enhancing Text Text Enhancement Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern SettingsTo select a Photo/Density setting Specifying Copy Settings Chapter To select a Screen Pattern setting To select a glossy finish Glossy Mode settingTo check the settings Checking the SettingsChecking the Settings To change the settings Controlling Jobs Description of Jobs Multi-job featureJob Queuing jobsControlling Jobs Chapter Print List Screen Job Log ScreensScan List Screen Job Log ScreensJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Scanned Job Screen Job Control ScreensJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs Jobs programmed in user boxes can be printed UserBox ScreenTouch Job Log, and check the status of the jobs To print a job from a user boxMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Index Access key Clear key Copy key Interrupt key KeypadIndex Scan key Start key Stop key Touch panelDouble-sided 2in1 copies Double-sided 4in1 copies Index Copy 1 set Copy settings Copy trackDensity setting Background 5-32 10,4-2,4-1026,5-28 Orig CopyPostcard Power switch Turning OFF Turning on Index Photo Image settingPrint area Specialty paperZoom settings 5-8 Auto size Text & Photo setting 5-32 Text setting5-9 EnlargementCopyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb