Minolta CF2002 user manual Energy Saver Mode, To recover from Energy Saver mode, Sleep Mode

Page 24

1.5 Turning the Copier On and Off

1

 

The conditions for all modes and functions automatically returning to their de- fault settings can be specified using the “Auto Panel Reset” function on the Us- er’s Choice: 1 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume.

Energy Saver Mode

If the copier is not used for 15 minutes, it automatically enters Energy Saver mode.

When the copier enters Energy Saver mode, the indicator on the [Start] key remains lit in green and the touch panel goes off. The copier conserves energy and waits to receive a job.

If the copier is not used for 30 minutes, it automatically enters Sleep mode.

The length of time after the last operation until the copier enters Energy Saver mode can be specified using the “Energy Saver” function on the User’s Choice: 1 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations”in the Administrator Operations volume.

To recover from Energy Saver mode

1Press the [Start] key. (The Energy Saver mode can also be canceled by pressing any key on the operation panel or by touching the touch panel.)

2The touch panel comes on again, and then after the copier has finished warming up, it is ready to begin printing (after about 30 seconds at normal room temper- ature (68°F)).

Sleep Mode

If the copier is not used for 30 minutes, the copier automatically enters Sleep mode.

The length of time after the last operation until the copier enters Sleep mode can be specified using the “Sleep” function on the User’s Choice: 1 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utillity Mode Operations” in the Administrator Operations volume.

Before Making Copies Chapter 1

CF2002/CF3102

1-17

Image 24
Contents CF2002/CF3102 Contents Stopping Printing Interrupting a Copy JobTo interrupt copying Print AreaSelecting a Color Setting Selecting a Finishing SettingSpecifying a Zoom Setting Document FeedingCopy Settings Selecting a Photo/Density SettingChecking the Settings To check the settings To change the settingsDescription of Jobs Job Log ScreensJob Control Screens IndexAdministrator Operations Enlarge Display Mode Operation GuideAvailable Features Auxiliary Functions Scanning Operations Advanced OperationsBefore Making Copies Introduction Structure of the ManualIntroduction Available Features Color SettingsSorting Available Features Finishing SettingsZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Densty Settings Text Enhancement SettingGlossy Mode Setting  Select this setting when copying glossy imagesBefore Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies BeforeNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panelWhen the copier is turned on Auto Panel ResetTurning the Copier On and Off To turn the copier onEnergy Saver Mode To recover from Energy Saver modeSleep Mode To recover from Sleep mode When the copier is turned off Turning the Copier On and OffTo turn the copier off Using the Touch Panel Default SettingsDescription of the Touch Panel Using the Touch Panel TipSettings screen Structure of the DisplayOperating the Touch Panel Be careful not to damage the touch panelBefore Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic CopiesMaking Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Job can be canceled while it is being printed Stopping PrintingTo stop/restart/delete a print job Stopping Printing Interrupting a Copy Job To interrupt copyingInterrupting a Copy Job Making Test Copies Copy 1 Set To make a test copyBasic Copy Operations Chapter Making Copies Using Accounts Using the Copy Track FunctionTo make copies when accounts are specified Loading Paper Paper Specifications Use paper that meets the following specificationsPaper Types Paper Specifications Paper SizesNon-standard paper Standard paperPaper Capacity Paper feed unit and large capacity cabinet are optionalTypes of paper can be used Paper can be usedLoading Paper Chapter Print Area Paper StoragePaper output direction Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawerLoading Paper Loading Paper Into the 1st DrawerLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Setting the Paper Size for the 1st Drawer To set the paper sizeTouch Paper To set a paper size in metric measurements To set a non-standard custom paper sizeTo store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-liftingSpecialty Paper function To set the Specialty Paper functionLoading Paper Into the Large Capacity Cabinet Pull out the paper drawerLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Feeding Document TypesMulti-sheet feeding Plain paper Multi-sheet feeding Thick paperMixed Originals Paper Sizes Possible combinations for mixed original paper sizesDocument Precautions Multi-Sheet Feeding Document Precautions Manual FeedingFeeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scalesOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color settingSelecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Non-Sorting Non-Sort Setting Crisscross Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort SettingStapling with finisher FN-116 installed Stapling with finisher FN-8 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Specifying a Zoom Setting Automatic Scaling Auto Size SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge SettingsMinimizing Minimal Setting Custom Sizing CustomZoom SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom settingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Setting Selecting the Manual Bypass Tray Bypass SettingSelecting the Paper Manually Selecting the Paper Setting Small-Sized DocumentsCentering Auto Paper Source Selection Feature To select the Paper settingSelecting the Orig Copy Settings Original Set- tings Selecting the Orig Copy Settings Original SettingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Enhancing Text Text Enhancement Setting Specifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern SettingsTo select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern settingChecking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Multi-job feature Description of JobsJob Queuing jobsControlling Jobs Chapter Job Log Screens Print List ScreenJob Log Screens Scan List ScreenJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job ScreenJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printedTo print a job from a user box Touch Job Log, and check the status of the jobsMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Access key Clear key Copy key Interrupt key Keypad IndexIndex Scan key Start key Stop key Touch panelIndex Copy 1 set Copy settings Copy track Density setting BackgroundDouble-sided 2in1 copies Double-sided 4in1 copies 10,4-2,4-10 5-3226,5-28 Orig CopyIndex Photo Image setting Postcard Power switch Turning OFF Turning onPrint area Specialty paperText & Photo setting 5-32 Text setting Zoom settings 5-8 Auto size5-9 EnlargementCopyright
Related manuals
Manual 212 pages 52.15 Kb Manual 51 pages 20.82 Kb