Minolta CF2002 user manual Making Test Copies Copy 1 Set, To make a test copy

Basic Copy Operations Chapter 2

2 2.5 Making Test Copies (Copy 1 Set)

2.5Making Test Copies (Copy 1 Set)

Before printing a large number of copies, a sample copy can be printed so you can check the specified settings. This is convenient for checking the selected settings before printing.

If a job is currently being printed, that job is interrupted so one test copy can be printed. After the single test copy is printed, the interrupted job automatically con- tinues printing.

The number of copies remaining after the test print are recorded and the job is queued to be printed.

To make a test copy

1Select the desired Copy mode settings.

2In the Basic screen, touch [Copy 1 Set].

3Press the [Start] key. Scanning of the docu- ment begins, and the job is queued.

4Only one test copy is printed. Check the test copy.

A message appears,

asking if the job should be continued.

5If the remaining number of copies can be made with the current settings, touch [Yes].

The print job is queued for printing of the re- maining number of cop- ies.

2-16 CF2002/CF3102