Minolta CF2002 user manual To reduce paper use

Page 39

Basic Copy Operations Chapter 2

	2	2.2 Practical Copy Examples
	2

To reduce paper use

An example for copying four single-sided Letter-size documents onto one single- sided Letter-size page is described below.


	1			2				1	2
					3


						4		3	4

Load the document into the duplexing document feeder.

When loading the document, load it so that the side that you wish to copy faces up and the top is toward the rear of the copier. Then, adjust the document guides to fit the size of the document.

Touch [OrigÖCopy], and then touch [4in1/Booklet].

Touch [1-4in1], and then touch [Enter].

Touch [Paper].

Make sure that Letter-size paper is loaded into a paper drawer.

Make sure that the number of copies is set to “1”.

Press the [Start] key. The copy job appears in the job display.

Copying is performed in the order that the job was programmed.

2-8	CF2002/CF3102

Image 39

Contents CF2002/CF3102 Contents Print Area Stopping PrintingInterrupting a Copy Job To interrupt copyingDocument Feeding Selecting a Color SettingSelecting a Finishing Setting Specifying a Zoom SettingTo check the settings To change the settings Copy SettingsSelecting a Photo/Density Setting Checking the SettingsIndex Description of JobsJob Log Screens Job Control ScreensAdvanced Operations Administrator OperationsEnlarge Display Mode Operation Guide Available Features Auxiliary Functions Scanning OperationsBefore Making Copies Structure of the Manual IntroductionIntroduction Available Features Color SettingsSorting Available Features Finishing SettingsZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Select this setting when copying glossy images Densty SettingsText Enhancement Setting Glossy Mode SettingBefore Making Copies Chapter Making Copies Before Names of Control Panel Parts and Their FunctionsNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel To adjust the angle of the control panel Adjusting the Angle of the Control PanelTo turn the copier on When the copier is turned onAuto Panel Reset Turning the Copier On and OffEnergy Saver Mode To recover from Energy Saver modeSleep Mode To recover from Sleep mode When the copier is turned off Turning the Copier On and OffTo turn the copier off Using the Touch Panel Default SettingsDescription of the Touch Panel Tip Using the Touch PanelStructure of the Display Settings screenBe careful not to damage the touch panel Operating the Touch PanelBefore Making Copies Chapter Basic Copy 2 Operations Making Basic Copies Procedure for making basic copies is described belowMaking Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Job can be canceled while it is being printed Stopping PrintingTo stop/restart/delete a print job Stopping Printing To interrupt copying Interrupting a Copy JobInterrupting a Copy Job To make a test copy Making Test Copies Copy 1 SetBasic Copy Operations Chapter Making Copies Using Accounts Using the Copy Track FunctionTo make copies when accounts are specified Loading Paper Paper Specifications Use paper that meets the following specificationsPaper Types Standard paper Paper SpecificationsPaper Sizes Non-standard paperPaper can be used Paper CapacityPaper feed unit and large capacity cabinet are optional Types of paper can be usedLoading Paper Chapter Print Area Paper StoragePaper output direction Order for selecting another paper drawer Automatically Selecting the Paper SourceAutomatically Selecting the Paper Source Operating conditionsLoading Paper Into the 1st Drawer Loading PaperLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Setting the Paper Size for the 1st Drawer To set the paper sizeTouch Paper To set a non-standard custom paper size To set a paper size in metric measurementsTo store a non-standard custom paper size To select a stored non-standard custom paper size Pull out the paper drawer Press down on the paper-lifting Loading Paper Into the 2nd Drawer or a Paper Feed UnitTo set the Specialty Paper function Specialty Paper functionPull out the paper drawer Loading Paper Into the Large Capacity CabinetLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Multi-sheet feeding Thick paper Document FeedingDocument Types Multi-sheet feeding Plain paperPossible combinations for mixed original paper sizes Mixed Originals Paper SizesDocument Precautions Manual Feeding Document Precautions Multi-Sheet FeedingFeeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Align the document with the docu- ment scales Manual FeedingOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings To select the Color setting Selecting a Color SettingSelecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Crisscross Sorting Sort Setting Non-Sorting Non-Sort SettingCrisscross Non-Sorting Non-Sort Setting Sorting Sort SettingStapling with finisher FN-116 installed Stapling with finisher FN-8 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Enlarging Enlarge Settings Specifying a Zoom SettingAutomatic Scaling Auto Size Setting Specifying Full Size ⋅ 1.000 SettingTo specify a Zoom setting Minimizing Minimal SettingCustom Sizing CustomZoom Setting Vertical and Horizontal Scaling X/Y Zoom SettingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Setting Selecting the Manual Bypass Tray Bypass SettingSelecting the Paper Manually Selecting the Paper Setting Small-Sized DocumentsCentering To select the Paper setting Auto Paper Source Selection FeatureSelecting the Orig Copy Settings Original Set- tings Selecting the Orig Copy Settings Original SettingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Copy Settings Selecting the Orig Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Reducing Moire Effects Screen Pattern Settings Enhancing Text Text Enhancement SettingSpecifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finishTo select a Photo/Density setting Specifying Copy Settings Chapter To select a Screen Pattern setting To select a glossy finish Glossy Mode settingChecking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Queuing jobs Multi-job featureDescription of Jobs JobControlling Jobs Chapter Print List Screen Job Log ScreensScan List Screen Job Log ScreensJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Scanned Job Screen Job Control ScreensJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs Jobs programmed in user boxes can be printed UserBox ScreenTouch Job Log, and check the status of the jobs To print a job from a user boxMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Scan key Start key Stop key Touch panel Access key Clear key Copy key Interrupt key KeypadIndex IndexIndex Copy 1 set Copy settings Copy track Density setting BackgroundDouble-sided 2in1 copies Double-sided 4in1 copies Orig Copy 10,4-2,4-105-32 26,5-28Specialty paper Index Photo Image settingPostcard Power switch Turning OFF Turning on Print areaEnlargement Text & Photo setting 5-32 Text settingZoom settings 5-8 Auto size 5-9Copyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb