Minolta CF2002 user manual To make copies from a book or magazine

Page 40

2.2 Practical Copy Examples	2

To make copies from a book or magazine

An example for making two separate single-sided Letter C-size copies from an open Letter-size book is described below.

1	2	1
		2

Position the book face down onto the original glass. When positioning the document, position it so that the top is toward the rear of the copier. In addition, align the center of the book with the book mark on the document scale.

Touch [OrigÖCopy], and then touch [Book].

Make sure that [Separation] is selected, and then touch [Enter].

Touch [Paper].

Select the drawer loaded with Letter C paper.

Make sure that the number of copies is set to “1”.

Press the [Start] key. The copy job appears in the job display.

Copying is performed in the order that the job was programmed.

Basic Copy Operations Chapter 2

CF2002/CF3102

2-9

Image 40

Contents CF2002/CF3102 Contents Stopping Printing Interrupting a Copy JobTo interrupt copying Print AreaSelecting a Color Setting Selecting a Finishing SettingSpecifying a Zoom Setting Document FeedingCopy Settings Selecting a Photo/Density SettingChecking the Settings To check the settings To change the settingsDescription of Jobs Job Log ScreensJob Control Screens IndexAdministrator Operations Enlarge Display Mode Operation GuideAvailable Features Auxiliary Functions Scanning Operations Advanced OperationsBefore Making Copies Introduction Structure of the ManualIntroduction Color Settings Available FeaturesSorting Finishing Settings Available FeaturesZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Densty Settings Text Enhancement SettingGlossy Mode Setting Select this setting when copying glossy imagesBefore Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies BeforeNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panelWhen the copier is turned on Auto Panel ResetTurning the Copier On and Off To turn the copier onTo recover from Energy Saver mode Energy Saver ModeSleep Mode To recover from Sleep mode Turning the Copier On and Off When the copier is turned offTo turn the copier off Default Settings Using the Touch PanelDescription of the Touch Panel Using the Touch Panel TipSettings screen Structure of the DisplayOperating the Touch Panel Be careful not to damage the touch panelBefore Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic CopiesMaking Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Stopping Printing Job can be canceled while it is being printedTo stop/restart/delete a print job Stopping Printing Interrupting a Copy Job To interrupt copyingInterrupting a Copy Job Making Test Copies Copy 1 Set To make a test copyBasic Copy Operations Chapter Using the Copy Track Function Making Copies Using AccountsTo make copies when accounts are specified Loading Paper Use paper that meets the following specifications Paper SpecificationsPaper Types Paper Specifications Paper SizesNon-standard paper Standard paperPaper Capacity Paper feed unit and large capacity cabinet are optionalTypes of paper can be used Paper can be usedLoading Paper Chapter Paper Storage Print AreaPaper output direction Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawerLoading Paper Loading Paper Into the 1st DrawerLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP To set the paper size Setting the Paper Size for the 1st DrawerTouch Paper To set a paper size in metric measurements To set a non-standard custom paper sizeTo store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-liftingSpecialty Paper function To set the Specialty Paper functionLoading Paper Into the Large Capacity Cabinet Pull out the paper drawerLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Feeding Document TypesMulti-sheet feeding Plain paper Multi-sheet feeding Thick paperMixed Originals Paper Sizes Possible combinations for mixed original paper sizesDocument Precautions Multi-Sheet Feeding Document Precautions Manual FeedingFeeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scalesOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color settingSelecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Non-Sorting Non-Sort Setting Crisscross Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort SettingStapling with finisher FN-8 installed Stapling with finisher FN-116 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Specifying a Zoom Setting Automatic Scaling Auto Size SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge SettingsMinimizing Minimal Setting Custom Sizing CustomZoom SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom settingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Manual Bypass Tray Bypass Setting Selecting the Paper SettingSelecting the Paper Manually Small-Sized Documents Selecting the Paper SettingCentering Auto Paper Source Selection Feature To select the Paper settingSelecting the Orig Copy Settings Original Settings Selecting the Orig Copy Settings Original Set- tingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Enhancing Text Text Enhancement Setting Specifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern SettingsTo select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern settingChecking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Multi-job feature Description of JobsJob Queuing jobsControlling Jobs Chapter Job Log Screens Print List ScreenJob Log Screens Scan List ScreenJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job ScreenJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printedTo print a job from a user box Touch Job Log, and check the status of the jobsMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Access key Clear key Copy key Interrupt key Keypad IndexIndex Scan key Start key Stop key Touch panelDensity setting Background Index Copy 1 set Copy settings Copy trackDouble-sided 2in1 copies Double-sided 4in1 copies 10,4-2,4-10 5-3226,5-28 Orig CopyIndex Photo Image setting Postcard Power switch Turning OFF Turning onPrint area Specialty paperText & Photo setting 5-32 Text setting Zoom settings 5-8 Auto size5-9 EnlargementCopyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb