Minolta CF2002 user manual To set the Specialty Paper function

Page 67

Loading Paper Chapter 3

	3	3.5 Loading Paper
	3

5Load the paper into the drawer so that the side of the paper to be

printed onto (the side facing up when the package was un- wrapped) faces up.

Note

If the paper is curled, flatten it before loading it.

Do not load so much paper that the top of the stack is higher than the Ä mark.

Paper other than plain paper cannot be fed from the 2nd drawer or optional paper feed units.

If you wish to make copies onto paper other than plain paper, feed it through the manual bypass tray or the 1st drawer.

When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. If the paper is not aligned well, a paper mis- feed may occur. We recommend replenishing the paper only after all of the paper in the drawer has been used.

6Close the paper drawer.

“Specialty Paper” function

The paper loaded into the 2nd, 3rd or 4th drawer can be specified as special paper.

If the paper in a drawer is specified as special paper, the paper in that drawer is not automatically selected with the Paper setting “Auto Paper”. (However, that paper will automatically be selected with the Paper setting “Single Sided Only”.) This func- tion is useful if special paper is loaded into a paper drawer.

For more details, refer to “To set the “Specialty Paper” function” of the Administrator Operations volume.

To set the “Specialty Paper” function

1Press the [Utility] key.

2Touch [User’s Choice: 2].

3Touch [Specialty Paper].

4Select the paper drawer that you wish to set.

5Select the desired special paper setting.

3-18	CF2002/CF3102

Image 67

Contents CF2002/CF3102 Contents Print Area Stopping PrintingInterrupting a Copy Job To interrupt copyingDocument Feeding Selecting a Color SettingSelecting a Finishing Setting Specifying a Zoom SettingTo check the settings To change the settings Copy SettingsSelecting a Photo/Density Setting Checking the SettingsIndex Description of JobsJob Log Screens Job Control ScreensAdvanced Operations Administrator OperationsEnlarge Display Mode Operation Guide Available Features Auxiliary Functions Scanning OperationsBefore Making Copies Structure of the Manual IntroductionIntroduction Color Settings Available FeaturesSorting Finishing Settings Available FeaturesZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Select this setting when copying glossy images Densty SettingsText Enhancement Setting Glossy Mode SettingBefore Making Copies Chapter Making Copies Before Names of Control Panel Parts and Their FunctionsNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel To adjust the angle of the control panel Adjusting the Angle of the Control PanelTo turn the copier on When the copier is turned onAuto Panel Reset Turning the Copier On and OffTo recover from Energy Saver mode Energy Saver ModeSleep Mode To recover from Sleep mode Turning the Copier On and Off When the copier is turned offTo turn the copier off Default Settings Using the Touch PanelDescription of the Touch Panel Tip Using the Touch PanelStructure of the Display Settings screenBe careful not to damage the touch panel Operating the Touch PanelBefore Making Copies Chapter Basic Copy 2 Operations Making Basic Copies Procedure for making basic copies is described belowMaking Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Stopping Printing Job can be canceled while it is being printedTo stop/restart/delete a print job Stopping Printing To interrupt copying Interrupting a Copy JobInterrupting a Copy Job To make a test copy Making Test Copies Copy 1 SetBasic Copy Operations Chapter Using the Copy Track Function Making Copies Using AccountsTo make copies when accounts are specified Loading Paper Use paper that meets the following specifications Paper SpecificationsPaper Types Standard paper Paper SpecificationsPaper Sizes Non-standard paperPaper can be used Paper CapacityPaper feed unit and large capacity cabinet are optional Types of paper can be usedLoading Paper Chapter Paper Storage Print AreaPaper output direction Order for selecting another paper drawer Automatically Selecting the Paper SourceAutomatically Selecting the Paper Source Operating conditionsLoading Paper Into the 1st Drawer Loading PaperLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP To set the paper size Setting the Paper Size for the 1st DrawerTouch Paper To set a non-standard custom paper size To set a paper size in metric measurementsTo store a non-standard custom paper size To select a stored non-standard custom paper size Pull out the paper drawer Press down on the paper-lifting Loading Paper Into the 2nd Drawer or a Paper Feed UnitTo set the Specialty Paper function Specialty Paper functionPull out the paper drawer Loading Paper Into the Large Capacity CabinetLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Multi-sheet feeding Thick paper Document FeedingDocument Types Multi-sheet feeding Plain paperPossible combinations for mixed original paper sizes Mixed Originals Paper SizesDocument Precautions Manual Feeding Document Precautions Multi-Sheet FeedingFeeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Align the document with the docu- ment scales Manual FeedingOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings To select the Color setting Selecting a Color SettingSelecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Crisscross Sorting Sort Setting Non-Sorting Non-Sort SettingCrisscross Non-Sorting Non-Sort Setting Sorting Sort SettingStapling with finisher FN-8 installed Stapling with finisher FN-116 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Enlarging Enlarge Settings Specifying a Zoom SettingAutomatic Scaling Auto Size Setting Specifying Full Size ⋅ 1.000 SettingTo specify a Zoom setting Minimizing Minimal SettingCustom Sizing CustomZoom Setting Vertical and Horizontal Scaling X/Y Zoom SettingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Manual Bypass Tray Bypass Setting Selecting the Paper SettingSelecting the Paper Manually Small-Sized Documents Selecting the Paper SettingCentering To select the Paper setting Auto Paper Source Selection FeatureSelecting the Orig Copy Settings Original Settings Selecting the Orig Copy Settings Original Set- tingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Copy Settings Selecting the Orig Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Reducing Moire Effects Screen Pattern Settings Enhancing Text Text Enhancement SettingSpecifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finishTo select a Photo/Density setting Specifying Copy Settings Chapter To select a Screen Pattern setting To select a glossy finish Glossy Mode settingChecking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Queuing jobs Multi-job featureDescription of Jobs JobControlling Jobs Chapter Print List Screen Job Log ScreensScan List Screen Job Log ScreensJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Scanned Job Screen Job Control ScreensJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs Jobs programmed in user boxes can be printed UserBox ScreenTouch Job Log, and check the status of the jobs To print a job from a user boxMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Scan key Start key Stop key Touch panel Access key Clear key Copy key Interrupt key KeypadIndex IndexDensity setting Background Index Copy 1 set Copy settings Copy trackDouble-sided 2in1 copies Double-sided 4in1 copies Orig Copy 10,4-2,4-105-32 26,5-28Specialty paper Index Photo Image settingPostcard Power switch Turning OFF Turning on Print areaEnlargement Text & Photo setting 5-32 Text settingZoom settings 5-8 Auto size 5-9Copyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb