Minolta CF2002 Stapling with finisher FN-116 installed, Stapling with finisher FN-8 installed

Page 92

5.2 Selecting a Finishing Setting	5

The “Criss Cross Mode” function on the User’s Choice: 2 screen must be set to “Yes”.

❍For details on the “User’s Choice” functions, refer to “Specifying Default Set- tings (“User’s Choice” Functions)” in the Administrator Operations volume.

Stapling (with finisher FN-116 installed)

The copies are bound together with a staple in the corner.

However, stapling is only performed if the following conditions are met.

The number of copies is set to between 2 and 30.

If standard-size paper is used, the paper sizes must be Letter L, Letter C, Exec- utive L (7-1/4 ⋅ 10-1/2 in. L), Executive C (7-1/4 ⋅ 10-1/2 in. C), Legal L and 11 ⋅ 17 L.

If nonstandard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in.

If nonstandard-size paper is used, the paper length must be between 7-1/4 in. and 17 in.

The copier must not enter Interrupt mode.

Stapling (with finisher FN-8 installed)

The copies are bound together with a staple. Either the “Corner Staple” or the “2- Point Staple” Finishing setting can be selected.

However, stapling is only performed if the following conditions are met.

The number of copies is set to between 2 and 50. (However, if the paper length is 11-3/4 in. or more, the number of copies can only be set to 25 or less.)

If standard-size paper is used, the paper sizes must be Letter L, Letter C, Legal L and 11 ⋅ 17 L.

If nonstandard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in.

If nonstandard-size paper is used, the paper length must be between 7-1/4 in. and 17 in.

The copier must not enter Interrupt mode.

Hole-Punching

Two holes for filing copies in binders can be punched. The position of the punched holes can be specified along the left side or along the top.

However, hole-punching is only performed if the following conditions are met.

Finisher FN-8 is installed.

Punch kit PK-4 is installed.

If standard-size paper is used, the paper sizes must be as follows:

Letter L, Letter C, Legal L and 11 ⋅ 17 L (with the “2-Hole Punch” setting) Letter C and 11 ⋅ 17 L (with the “3-Hole Punch” setting).

CF2002/CF3102

5-5

Specifying Copy Settings Chapter 5

Image 92

Contents CF2002/CF3102 Contents Stopping Printing Interrupting a Copy JobTo interrupt copying Print AreaSelecting a Color Setting Selecting a Finishing SettingSpecifying a Zoom Setting Document FeedingCopy Settings Selecting a Photo/Density SettingChecking the Settings To check the settings To change the settingsDescription of Jobs Job Log ScreensJob Control Screens IndexAdministrator Operations Enlarge Display Mode Operation GuideAvailable Features Auxiliary Functions Scanning Operations Advanced OperationsBefore Making Copies Introduction Structure of the ManualIntroduction Sorting Available FeaturesColor Settings Zoom Settings Available FeaturesFinishing Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Densty Settings Text Enhancement SettingGlossy Mode Setting Select this setting when copying glossy imagesBefore Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies BeforeNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panelWhen the copier is turned on Auto Panel ResetTurning the Copier On and Off To turn the copier onSleep Mode Energy Saver ModeTo recover from Energy Saver mode To recover from Sleep mode To turn the copier off When the copier is turned offTurning the Copier On and Off Description of the Touch Panel Using the Touch PanelDefault Settings Using the Touch Panel TipSettings screen Structure of the DisplayOperating the Touch Panel Be careful not to damage the touch panelBefore Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic CopiesMaking Basic Copies Basic Copy Operations Chapter To make a copy that is the same size as the original Practical Copy ExamplesPractical Copy Examples To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter To stop/restart/delete a print job Job can be canceled while it is being printedStopping Printing Stopping Printing Interrupting a Copy Job To interrupt copyingInterrupting a Copy Job Making Test Copies Copy 1 Set To make a test copyBasic Copy Operations Chapter To make copies when accounts are specified Making Copies Using AccountsUsing the Copy Track Function Loading Paper Paper Types Paper SpecificationsUse paper that meets the following specifications Paper Specifications Paper SizesNon-standard paper Standard paperPaper Capacity Paper feed unit and large capacity cabinet are optionalTypes of paper can be used Paper can be usedLoading Paper Chapter Paper output direction Print AreaPaper Storage Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawerLoading Paper Loading Paper Into the 1st DrawerLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Touch Paper Setting the Paper Size for the 1st DrawerTo set the paper size To set a paper size in metric measurements To set a non-standard custom paper sizeTo store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-liftingSpecialty Paper function To set the Specialty Paper functionLoading Paper Into the Large Capacity Cabinet Pull out the paper drawerLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Feeding Document TypesMulti-sheet feeding Plain paper Multi-sheet feeding Thick paperMixed Originals Paper Sizes Possible combinations for mixed original paper sizesDocument Precautions Multi-Sheet Feeding Document Precautions Manual FeedingMulti-Sheet Feeding Feeding the DocumentFeeding the Document Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scalesOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color settingAutomatic Sort/Non-Sort Setting Selection Selecting a Finishing SettingSelecting a Finishing Setting Non-Sorting Non-Sort Setting Crisscross Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort SettingHole-Punching Stapling with finisher FN-116 installedStapling with finisher FN-8 installed To specify Finishing settings Selecting a Finishing Setting Specifying a Zoom Setting Automatic Scaling Auto Size SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge SettingsMinimizing Minimal Setting Custom Sizing CustomZoom SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom settingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Manually Selecting the Paper SettingSelecting the Manual Bypass Tray Bypass Setting Centering Selecting the Paper SettingSmall-Sized Documents Auto Paper Source Selection Feature To select the Paper settingOriginal Settings Selecting the Orig Copy Settings Original Set- tingsSelecting the Orig Copy Settings Original Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Enhancing Text Text Enhancement Setting Specifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern SettingsTo select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern settingTo check the settings Checking the SettingsChecking the Settings To change the settings Controlling Jobs Multi-job feature Description of JobsJob Queuing jobsControlling Jobs Chapter Job Log Screens Print List ScreenJob Log Screens Scan List ScreenJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job ScreenJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printedTo print a job from a user box Touch Job Log, and check the status of the jobsMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Access key Clear key Copy key Interrupt key Keypad IndexIndex Scan key Start key Stop key Touch panelDouble-sided 2in1 copies Double-sided 4in1 copies Index Copy 1 set Copy settings Copy trackDensity setting Background 10,4-2,4-10 5-3226,5-28 Orig CopyIndex Photo Image setting Postcard Power switch Turning OFF Turning onPrint area Specialty paperText & Photo setting 5-32 Text setting Zoom settings 5-8 Auto size5-9 EnlargementCopyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb