Minolta user manual Making Basic Copies, CF2002/CF3102

Page 34

2.1 Making Basic Copies

Make sure that the Zoom setting “⋅1.000” is selected.

•For details, refer to “Specifying a Zoom Setting” (p. 5-8).

Make sure that the Paper setting “Auto Paper” is selected.

•For details, refer to “Selecting the Paper Setting” (p. 5-12).

Touch [OrigÖCopy].

Make sure that the single-sided original and the single-sided copy settings are selected.

•For details, refer to “Selecting the OrigÖCopy Settings” (p. 5-15).

Touch [Photo/Density].

•Make sure that the Photo/Density setting “Text&Photo” is selected.

•Make sure that the standard (middle) Density setting is selected.

•For details, refer to “Selecting the Photo/Density Setting” (p. 5-31).

Touch [Auxiliary].

Check that no functions are selected. No Auxiliary functions are used during basic copying.

•For details, refer to the Advanced Operations volume.

Make sure that the number of copies is set to “1”.

•To specify multiple copies, use the keypad to enter the desired number of copies. Up to 999 copies can be specified.

Press the [Start] key. The copy job appears in the job display.

•Copying is performed in the order that the job was programmed.

•If other jobs are being printed, the job will be queued (multi-job feature).

2

Basic Copy Operations Chapter 2

CF2002/CF3102

2-3

Image 34

Contents CF2002/CF3102 Contents To interrupt copying Stopping PrintingInterrupting a Copy Job Print AreaSpecifying a Zoom Setting Selecting a Color SettingSelecting a Finishing Setting Document FeedingChecking the Settings Copy SettingsSelecting a Photo/Density Setting To check the settings To change the settingsJob Control Screens Description of JobsJob Log Screens IndexAvailable Features Auxiliary Functions Scanning Operations Administrator OperationsEnlarge Display Mode Operation Guide Advanced OperationsBefore Making Copies Introduction Structure of the ManualIntroduction Color Settings Available FeaturesSorting Finishing Settings Available FeaturesZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Glossy Mode Setting Densty SettingsText Enhancement Setting Select this setting when copying glossy imagesBefore Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies BeforeNames of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panelTurning the Copier On and Off When the copier is turned onAuto Panel Reset To turn the copier onTo recover from Energy Saver mode Energy Saver ModeSleep Mode To recover from Sleep mode Turning the Copier On and Off When the copier is turned offTo turn the copier off Default Settings Using the Touch PanelDescription of the Touch Panel Using the Touch Panel TipSettings screen Structure of the DisplayOperating the Touch Panel Be careful not to damage the touch panelBefore Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic CopiesMaking Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Stopping Printing Job can be canceled while it is being printedTo stop/restart/delete a print job Stopping Printing Interrupting a Copy Job To interrupt copyingInterrupting a Copy Job Making Test Copies Copy 1 Set To make a test copyBasic Copy Operations Chapter Using the Copy Track Function Making Copies Using AccountsTo make copies when accounts are specified Loading Paper Use paper that meets the following specifications Paper SpecificationsPaper Types Non-standard paper Paper SpecificationsPaper Sizes Standard paperTypes of paper can be used Paper CapacityPaper feed unit and large capacity cabinet are optional Paper can be usedLoading Paper Chapter Paper Storage Print AreaPaper output direction Operating conditions Automatically Selecting the Paper SourceAutomatically Selecting the Paper Source Order for selecting another paper drawerLoading Paper Loading Paper Into the 1st DrawerLoading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP To set the paper size Setting the Paper Size for the 1st DrawerTouch Paper To set a paper size in metric measurements To set a non-standard custom paper sizeTo store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-liftingSpecialty Paper function To set the Specialty Paper functionLoading Paper Into the Large Capacity Cabinet Pull out the paper drawerLoading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Multi-sheet feeding Plain paper Document FeedingDocument Types Multi-sheet feeding Thick paperMixed Originals Paper Sizes Possible combinations for mixed original paper sizesDocument Precautions Multi-Sheet Feeding Document Precautions Manual FeedingFeeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scalesOriginal Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color settingSelecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Sorting Sort Setting Non-Sorting Non-Sort SettingCrisscross Non-Sorting Non-Sort Setting Crisscross Sorting Sort SettingStapling with finisher FN-8 installed Stapling with finisher FN-116 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Specifying Full Size ⋅ 1.000 Setting Specifying a Zoom SettingAutomatic Scaling Auto Size Setting Enlarging Enlarge SettingsVertical and Horizontal Scaling X/Y Zoom Setting Minimizing Minimal SettingCustom Sizing CustomZoom Setting To specify a Zoom settingMinimal zoom ratios To recall a stored custom zoom ratio Selecting the Manual Bypass Tray Bypass Setting Selecting the Paper SettingSelecting the Paper Manually Small-Sized Documents Selecting the Paper SettingCentering Auto Paper Source Selection Feature To select the Paper settingSelecting the Orig Copy Settings Original Settings Selecting the Orig Copy Settings Original Set- tingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy SettingsExample For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density SettingSpecifying the Image Type Photo/Density Settings Select this setting for copies with a glossy finish Enhancing Text Text Enhancement SettingSpecifying a Glossy Finish Glossy Mode Setting Reducing Moire Effects Screen Pattern SettingsTo select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern settingChecking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Job Multi-job featureDescription of Jobs Queuing jobsControlling Jobs Chapter Job Log Screens Print List ScreenJob Log Screens Scan List ScreenJob List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job ScreenJob Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printedTo print a job from a user box Touch Job Log, and check the status of the jobsMemory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Index Access key Clear key Copy key Interrupt key KeypadIndex Scan key Start key Stop key Touch panelDensity setting Background Index Copy 1 set Copy settings Copy trackDouble-sided 2in1 copies Double-sided 4in1 copies 26,5-28 10,4-2,4-105-32 Orig CopyPrint area Index Photo Image settingPostcard Power switch Turning OFF Turning on Specialty paper5-9 Text & Photo setting 5-32 Text settingZoom settings 5-8 Auto size EnlargementCopyright

Related manuals

Manual 212 pages 52.15 Kb

Manual 51 pages 20.82 Kb