English
CONTROLS AND INDICATORS
FRONT PANEL (LCD Units)
Primary Power Switch: Press and release the
ON/OFF button to turn the unit ON or OFF.
Normal Mode Icon: This icon will illuminate when the utility power is within safe operating range.
Battery Mode Icon: This icon will illuminate when the Utility power is outside safe operating range and the unit is operating in the battery mode.
Bypass Mode Icon: This icon will illuminate when the unit is in bypass mode and you do not have battery backup protection.
Unit Fault Icon: The Fault icon illuminates when the UPS has detected an internal fault. (see section 5)
Unit Fault Icon: This icon and error code will illuminate when the self diagnostics are able to determine the problem.
Unit Charger Icon: This icon will illuminate when the unit is charging the batteries.
Unit Overload Icon: This icon will illuminate when the unit load has exceed the rating of the UPS. The UPS will transfer to bypass mode if the overload is not removed.
Estimated Time Remaining icons: These combination of LCD icons will illuminate when selected and the UPS is operating in the battery mode. The first time icon will appear as ">" if the estimated time remaining is greater than ten (10) minutes. This symbol will turn off when the estimated time remaining is less than 10 minutes and the remaining time will appear in the display.
Unit Audible Alarm Icon: This alarm will illuminate when audible alarm is silenced.
4