1
2
3
4 | 7 |
English
5
8
6
9
10
MCP 5000iE and MCP 7000iE
1.Fans: Internal Cooling Fans.
2.Maintenance Bypass Switch: In normal operation the switch must be in the UPS position. When doing routine maintenance the switch must be in the BPS position.
3.Output Circuit Breakers: Turn OFF/ON the output of the UPS.
4.Alarm Silencer: Silences the Alarm in the Battery Mode.
5.Configuration Switches: Must be set before turning the UPS ON (see page 8).
6.Input Circuit Breakers: Turn OFF/ON the input of the UPS.
7.RS232 Port: Intelligent Communications Port.
8.Contact Closure Port: Simple Communications Port (AS400).
9.External Battery Pack Connector: Remove the panel for external Battery Pack Connection.
10.Access Panel for Input/Output Terminals: Remove the panel for Input/Ouptut Connections.
7