Minuteman UPS MCP-E user manual Replacing the Battery

Page 21

English

REPLACING THE BATTERY

REPLACING THE BATTERY

(Must be performed by Authorized Service Personnel ONLY)

The Tower Series UPS has a replacable battery(s), however the unit must be turned off, disconnected from utility and discharged prior to changing the batteries. The Rack Mount Series UPS has a hot swappable battery kit. Please read the following warning statements before attempting to service the battery(s).

NOTE: If there is a power interruption while replacing the hot-swappable batteries, with the UPS on, the load will not be backed up.

WARNING! This Uninterruptible Power Source contains potentially hazardous voltages. Do not attempt to disassemble the unit. This UPS contains no user serviceable parts. Repairs and Battery replacement must be performed by Authorized Service Personnel ONLY.

CAUTION: Do not open or multlate batteries. Released electrolyte is harmful to the skin and eyes and may be toxic.

CAUTION: Do not dispose of batteries in a fire. The batteries May explode.

WARNING!: The batteries in this UPS are recyclable. Dispose of the batteries properly. The batteries contain lead and pose a hazard to the environment and

human health if not disposed of properly. Refer to local codes for proper disposal requirements or return the battery to Minuteman.

MCP-E SERIES

Battery

Battery

Model #

Quantity

Type

 

 

 

MCP 700(i) E

3 each

12V7.2AH

 

 

 

MCP 1000(i) E

3 each

12V7.2AH

 

 

 

MCP 2000(i) E

6 each

12V7.2AH

 

 

 

MCP 3000(i) E

8 each

12V7.2AH

 

 

 

MCP 5000i E

20 each

12V7.2AH

 

 

 

MCP 7000i E

24 each

12V7.2AH

 

 

 

20

Image 21
Contents MCP-E Series Table of Contents Introduction Important Safety InstructionsPara Systems Life Support Policy Front Panel LCD Units Controls and IndicatorsEnglish Installation Placement InstallationMCP 5000iE and MCP 7000iE Installation Service Personnel only Installation of the mounting tray and the stablizing feet English Connecting Your Equipment Connecting to AN AC SourceComputer Interface Connection Optional Network Surge Protection Connection OptionalTurning the Unit ON/OFF OperationEnglish On Battery AlarmsEnglish Diagnostic codes for 700VA and 1KVA TroubleshootingEnglish Diagnostic Error Codes for 2KVA, 3KVA, 5KVA, 7KVA units Replacing the Battery Replacing the BatteryCSB Battery Replacement Procedure for Tower Model Battery Replacement Procedure for Rack Mount Models If the UPS Requires Service Obtaining ServiceInput Non-Battery Operation SpecificationsFunction Factory Default User Choices Description Configurable Parameters and SettingsCustomized Output Receptacle Panels Limited Product Warranty Limited Product WarrantyDeclaration of Conformity 302