Opticon LMD 1135 user manual Code Identification & Characters/Digits Transmitted, Start/End

Page 56

Manual No. 25-ULPNR102-01; Mar, 2005

LMD 1135 Laser Fixed Mount Scanner

22. Code Identification & Characters/Digits Transmitted

This feature instructs the scanner to use pre-existing code identifiers and/or to calculate/transmit a number indicating the total number of characters that are being transmitted to the host for specific symbologies. This feature allows the host to verify that the correct amount of data was received. This information may be transmitted as either a prefix or suffix.

Code identification using the pre-existing symbology codes can be accomplished using the “Code identification” command as shown in the example below.

Code length is transmitted as 2 or 6 digits depending upon the selection made from the menu below.

These commands can be used together or individually as required.

Example: To set a prefix for “<code identification>:<code length>:” scan the following menu items:

	< START/END>			Menu below
	<Set Prefix All Codes>			Section 15 (or specific symbology)
	<Enable Code Identification>			Menu below ($2)
	<:>			Menu below (6A)
	<Enable Code Length 2 or 6>			Menu below ($3) or ($6)
	<:>			Menu below (6A)
	<START/END>			Menu below


	Computer		Function	Bar Code
	Command		/Description	Command
	(ZZ)		START/END	[[
	(ZZ)		Programming Menu	[[

	$2		Code identification	%3
			Code identification

	$3		2 digits	%!
			Enable code length

	$6		6 digits	%7
			Enable code length

	6A		Direct Input Character ”:”	7B
			Direct Input Character ”:”

Page 52

Image 56

Contents Manual No -ULPNR102-01 March OSE Command Set User’s ManualPage Contents Technical Specifications Configuring the ScannerScanner Servicing and Maintenance Introduction and Getting StartedProduct Overview Quick Start-Up ProcedureSection Introduction and Getting Started Page Optical Specifications Section Technical SpecificationsPhysical Specifications Avoid specular reflection in the dead zone +/- 8 degrees Electrical Specifications JAN 13 R = 30 mm 1.2 orRS232 Communications Specifications Connector Pin-outsRS232 Signal Level RS232 Transmit / Receive Character FormatEnvironmental Specifications Pin No SignalOrdering Information ModelSection Positioning the Scanner for Optimum Performance Achieving Optimum PerformanceDistance to the Bar Code Depth-of-FieldAvoiding Specular Reflection Distance Max From Window WidthMeasuring Scanner Performance Quality Bar Code LabelsApplication Notes Tips for Achieving High Throughput Tips for Insuring Highest Data IntegrityTips for Verifying the Presence of a Bar Code Section Configuring the Scanner Programming Menus & CommandsDefault Settings Parameter Factory Default SettingSection Application Engineering Support Technical Assistance and SupportCommon Causes of Poor Performance Modified and/or Customized ScannersIEC 825-1 Class 1 Laser Device Section Scanner Servicing and MaintenanceSection Scanner Labeling Appendices ESC Computer Command CR Appendix aReset All Defaults U2 Command U2 What if you make a mistake?Global Defaults Symbology SelectionOptions for UPC Options for EAN-8 & EAN-13Options for Code Select Symbology for Prefix/SuffixPrefix/Suffix of Numeric Characters Prefix/Suffix of Alpha CharactersSetting the Trigger & Auto-Trigger Selecting the Read ModeParallel Read Mode HandshakingScanner Timeout Trigger Enabled Xmit Error Trigger Enabled Mode onlyMode Quiet Zone OptionsAppendix C Global Default & Scanner Configurations Command DescriptionComputer Including prefix/suffixSymbology Selection Description CommandSymbologies Bar CodeOnly EAN 13/8 +2 Add/Activate Specific Bar Code Symbologies START/ENDDisable all symbologies Delete/Deactivate Specific Bar Code SymbologiesAdd/Activate Specific Bar Code Symbologies Bar Code Command Description Options for UPCOptions for EAN-8 & EAN-13 Options for Code 39 & IT Pharmaceutical IT Pharmaceutical, enable Transmit of leading a Options for Codabar NW-7 Codabar NW-7 Format Options for Interleaved & Industrial 2 5 Format Standard and InterleavedOptions for Iata String formatMeaning of Acronym Number of digits 15 totalOptions for Code-128 / EAN-128 Options for Code-93Disable fixed length all Fixing the Number of DigitsCreating a Prefix and/or Suffix Setting Prefixes Identifying the Symbology UPC-E +2 or +5MSI/Plessey Setting Suffixes Identifying the Symbology Bar Code Command Description Direct Input of Numeric Characters Direct Input of Alpha Characters Direct Input of Alpha Characters Lower Case ETB Direct Input of Control CharactersSUB Direct Input Characters Misc Bar Code Command Description Code Identification & Characters/Digits Transmitted START/ENDCommunication Parameters Communication Parameters Handshaking TerminalMs intercharacter delay Disable buzzer Buzzer OperationSetting the Trigger & Auto-Trigger Functions Positive & Negative Bar CodesSelecting the Read Mode Trigger Function Enabled S8 Trigger Function Disabled S7Parallel labels only Parallel Read ModeAdd-on Wait Mode Applies to UPC/EAN only Scanner Timeout Trigger Enabled Mode only Multiple Read Reset Time Quiet Zone Options Redundant Decoding Transmitting Error Indications Trigger Enabled only Error Messages No decode / no labelGood Read LED Operation Appendix D Appendix E