Opticon LMD 1135 user manual Section Technical Specifications, Physical Specifications

Page 7

Manual No. 25-ULPNR102-01; Mar, 2005LMD 1135 Laser Fixed Mount Scanner

Section 2

Technical Specifications

Physical Specifications

Case Material	Plastic
Dimensions	2.2 x 1.9 x 1.0 in (WxDxH) (55 x 47.5 x 25.5 mm)
Weight	2.1 oz	(60 grams ) w/o cable
Cable Length	6.5 Feet	(2000 mm)
Connector	9-pin, DB9F-SC connector with power pigtail (evaluation configuration)
Mounting	4 threaded (M-3) mounting holes located on scanner bottom face

Symbologies Supported

♦Codabar (NW-7)

♦Code 39

♦Code 93

♦Code 128

♦Industrial 2 of 5 / Interleaved 2 of 5

♦MSI / Plessey

♦WPC (UPC / EAN / JAN)

♦IATA

♦Telepen

♦TriOptic

♦SCode

Optical Specifications

Scan Rate		100 scans per second ±20%
Light source		650 ±10nm visible laser diode
Narrow Bar Resolution		5 mil (0.15mm) at 0.9 PCS
Minimum PCS		0.45 (min. background reflectance of 70%)
Reading Distances LMD 1135 (Specification) * (See Typical in Appendix E)

	Bar Code Density		Near Distance	Far Distance
	Bar Code Density
	40 mil	(1.00 mm)	4.3” (110mm)	14.2” (360mm)
	20 mil	(0.50 mm)	3.1” (80mm)	9.8” (250mm)
	10 mil	(0.25 mm)	2.4” (60mm)	5.7” (145mm)
	6 mil	(0.15 mm)	1.8” (45mm)	3.1” (80mm)
	5 mil	(0.127 mm)	2.2” (55mm)	2.8” (70mm)

* measured from front edge of scanner

Page 3

Image 7

Contents User’s Manual Manual No -ULPNR102-01 March OSE Command SetPage Contents Introduction and Getting Started Technical SpecificationsConfiguring the Scanner Scanner Servicing and MaintenanceSection Introduction and Getting Started Quick Start-Up ProcedureProduct Overview Page Physical Specifications Section Technical SpecificationsOptical Specifications Avoid specular reflection in the dead zone +/- 8 degrees JAN 13 R = 30 mm 1.2 or Electrical SpecificationsRS232 Transmit / Receive Character Format RS232 Communications SpecificationsConnector Pin-outs RS232 Signal LevelModel Environmental SpecificationsPin No Signal Ordering InformationDepth-of-Field Section Positioning the Scanner for Optimum PerformanceAchieving Optimum Performance Distance to the Bar CodeDistance Max From Window Width Avoiding Specular ReflectionQuality Bar Code Labels Measuring Scanner PerformanceTips for Insuring Highest Data Integrity Application Notes Tips for Achieving High ThroughputTips for Verifying the Presence of a Bar Code Parameter Factory Default Setting Section Configuring the ScannerProgramming Menus & Commands Default SettingsModified and/or Customized Scanners Section Application Engineering SupportTechnical Assistance and Support Common Causes of Poor PerformanceSection Scanner Labeling Section Scanner Servicing and MaintenanceIEC 825-1 Class 1 Laser Device Appendices Appendix a ESC Computer Command CRWhat if you make a mistake? Reset All Defaults U2 Command U2Options for EAN-8 & EAN-13 Global DefaultsSymbology Selection Options for UPCOptions for Code Prefix/Suffix of Alpha Characters Select Symbology forPrefix/Suffix Prefix/Suffix of Numeric CharactersHandshaking Setting the Trigger & Auto-TriggerSelecting the Read Mode Parallel Read ModeQuiet Zone Options Scanner Timeout Trigger EnabledXmit Error Trigger Enabled Mode only ModeAppendix C Including prefix/suffix Global Default & Scanner ConfigurationsCommand Description ComputerBar Code Symbology SelectionDescription Command SymbologiesOnly EAN 13/8 +2 START/END Add/Activate Specific Bar Code SymbologiesAdd/Activate Specific Bar Code Symbologies Delete/Deactivate Specific Bar Code SymbologiesDisable all symbologies Options for UPC Bar Code Command DescriptionOptions for EAN-8 & EAN-13 Options for Code 39 & IT Pharmaceutical IT Pharmaceutical, enable Transmit of leading a Options for Codabar NW-7 Codabar NW-7 Format 5 Format Standard and Interleaved Options for Interleaved & Industrial 2Number of digits 15 total Options for IataString format Meaning of AcronymOptions for Code-93 Options for Code-128 / EAN-128Fixing the Number of Digits Disable fixed length allCreating a Prefix and/or Suffix UPC-E +2 or +5 Setting Prefixes Identifying the SymbologyMSI/Plessey Setting Suffixes Identifying the Symbology Bar Code Command Description Direct Input of Numeric Characters Direct Input of Alpha Characters Direct Input of Alpha Characters Lower Case Direct Input of Control Characters ETBSUB Direct Input Characters Misc Bar Code Command Description START/END Code Identification & Characters/Digits TransmittedCommunication Parameters Communication Parameters Terminal HandshakingMs intercharacter delay Buzzer Operation Disable buzzerPositive & Negative Bar Codes Setting the Trigger & Auto-Trigger FunctionsTrigger Function Enabled S8 Trigger Function Disabled S7 Selecting the Read ModeAdd-on Wait Mode Applies to UPC/EAN only Parallel Read ModeParallel labels only Scanner Timeout Trigger Enabled Mode only Multiple Read Reset Time Quiet Zone Options Redundant Decoding Error Messages No decode / no label Transmitting Error Indications Trigger Enabled onlyGood Read LED Operation Appendix D Appendix E