Ultra electronic Turbo MS Cleaning the Card Cleaning Roller sticky or tacky roller

Ultra Electronics Card Systems Quick Start Guide

Cleaning the Card Cleaning	F
Roller (sticky or tacky roller)

12

The 'tacky' roller should be removed for cleaning before each batch of 100 cards. To remove the ‘tacky’ roller, release the locking tab on the left-hand side and, by putting your fingers beneath it, the roller can then be removed. Remove surface dust by using a strip of ‘Scotch’ adhesive tape, and ‘snap’ back into place.

34

Close the Printer Cover and secure the front latch.

Install the Cassette into the Printer.

MAGICARD TURBO Color Printer Page 11