Ultra electronic Turbo MS quick start Optional Starter KIT

Page 6

Quick Start Guide

Ultra Electronics Card Systems

56

Envelope containing this Quick Start Guide and the PrintMAGIC WINDOWS Driver 3.5" floppy disk.

OPTIONAL STARTER KIT

Note: This Starter Kit is not supplied with your printer and must be ordered separately, Part No M9004-698.

The Starter Kit contains:

One roll of UR1 YMCKO Dye Film for full colour printing

200 PVC Cards

25 Cleaning Cards and Cleaning Pen for Thermal Printhead

1 Pair of Gloves

1 Centronics IEEE 1284 Parallel Cable,

M2900-337

IMPORTANT NOTE:

Reference Centronics Parallel

Connection Cable:

It is recommended that an IEEE 1284 specification cable be used to connect the Turbo Printer to the parallel port of the PC.

This cable has double screening with the data wires being in twisted pairs to eliminate crosstalk and noise pickup found in the standard types of unscreened parallel printer cable.

Failure to use this specification cable may lead to image degradation and corruption of the image data being downloaded to the printer resulting in a poor quality or scrambled multi-coloured card being printed.

Page 6

MAGICARD TURBO Color Printer

Image 6
Contents Magicard Turbo Color Printer Quick Start Guide forLoad the supplied Windows Driver software ConventionsPreparing a Location For the Printer Location Requirements for your printerRemoving the Printer From the Box Checking Package Contents C Optional Starter KIT Install Dye Film D RecessesQuick Start Guide Ultra Electronics Card Systems Ultra Electronics Card Systems Quick Start Guide Load Plastic Cards Cleaning the Card Cleaning Roller sticky or tacky roller Connect the Printer To a Power Supply Test Printer Operation H Install the parallel Interface Cable I and Ultra Secure Key Install Windows Driver J Procedure to be followed if your PC uses WindowsQuick Start Guide Ultra Electronics Card Systems Printer Setup Printer SetupInitialise the Setup Colour Format / Film Card Settings Colour Adjust Which Mode Should I Use Non-ECP OperationECP Operation Install Windows NT4 Driver Install the Windows DriverProcedure to be followed if your PC uses Windows NT Printer Setup Select Document defaults... from the File menuSetup Data Transfer Format Overcoat SettingsOptions Please noteBlack Format Options Film Power SettingUltra Secure Feature Degree RotationProperties Verifying Computer to Printer Communication in Windows M Check the Installation Case DifficultyFor Further Assistance Important Cleaning Procedures P Thermal Printhead CleaningCleaning the Tacky Roller Cleaning the Rubber RollersMicro Switch Cleaning the Optics Cleaning the Magnetic Head if fittedLED Error Codes Q Canadian Department of Communications Statement Limited Warranty Information EC Declaration of Conformity Ultra Electronics Ocean Systems Coles