The Speaker Company M23 Batch Mode Peeler Mode, Print Mode Tear Off Mode/Batch Mode/Peeler Mode

4.1.1.4 Print Mode: (Tear Off Mode/Batch Mode/Peeler Mode)

Batch Mode

Peeler Mode

 V

This option is used to set the print mode. Printer default setting is Batch Mode. When enter this list, the print mode in the right side of  icon is the printer

current setting. Press button under  and  icon to select the different

print mode, and press button under “V” icon to enable the setting.

Printer Mode	Description
Tear Off Mode:	Next label leading edge is aligned to the print head burn
	line location.
Batch Mode:	Once image is printed completely, label gap/black mark will
	be fed to the tear plate location for tear away.
Peeler Mode:	Enable the label peel off mode.

4.1.1.5 Offset:

Offset

+000

 V

This option is used to fine tune media stop location. Press the button under  icon to move the cursor from left digit to right digit, and press the

button to set the value from “+” to “-” or “0” to “9”. Press the button under “V” icon to set the value into printer. The default value is +000.

4.1.1.6 Reference X & Reference Y:

Reference X

000

  V

Reference Y

000

  V

This option is used to set the origin of printer coordinate system horizontally

and vertically. Press the button under  icon to move the cursor from left

digit to right digit, and press the button under  icon to set the value from

“0” to “9”. Press the button under “V” to set the value into printer. The default value is 000.

25