4.1.4 RF Network ( Optional )
Use this menu to configure optional 802.11b WiFi configuration. Checking the printer’s WiFi module status, configure the RF network settings, and reset the WiFi module.
Note:
Before using WiFi module, please set the
RF Network
Status
- Configure -
Reset
-
Exit
Status Configure
]
Press 
button under and icon to select the different options, and press button under “]” icon to enter the option.
4.1.4.1 Status: (Checking the Status)
000.000.000.000 Version 1.2 M23 WiFi
TSC Wireless
The WiFi module local IP Address, firmware version, printer mode, board version, and device name are displayed.
4.1.4.2 Configure:
Press any 
button
00A0F8E2AD9E Protocol: TCP State: Unknow Radio: IEEE 802.11b
The MAC Address, Protocol, current state, and radio type are displayed. Press any 
to return to the RF Network menu.
Use this menu to set the printer's IP Address, Subnet Mask, Gateway, Power Mode, Protocol, SSID and Escape character.
IP Address
Subnet Mask
]
35