The Speaker Company M23 user manual Escape Char +035, Save Settings? Are you sure?, Exit, Reset

4.1.4.2.7 Escape Char

Escape Char

+035

 V

Use this option to set or view the Command Escape Character (CEC). Run-time messages from the radio begin with the CEC and the default is the pound sign (#), which has a decimal value of 035. You may need to change the default CEC character if it conflicts with other data, because unexpected operation could occur. The range is a decimal value between 1 and 255.

Press the button under  icon to move the cursor from left to right,

and press the button to set the value. Press the button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.8 Exit

When you select “Exit” after configuring, you see

Save Settings?

Are you sure?

X V

To save all the configuration settings, press the button under “V” icon.

To exit without saving the configuration settings, press the button under “X” icon.

4.1.4.3 Reset:

After saving the configuration, please reset the 802.11b WiFi module before the changes take effect. This option is used to reset the wireless print server by cycling the power off and than back on.

You may lose your current connection and application. Resetting the network may take up to one minute before you can access the wireless print server (radio).

RESET

Reset Command Sent

Hit key to continue

Press any button to return the RF Network menu. The RF Network printer is ready to use.

38