Telenetics CDMA manual Dcd Out Rts Txd Cts Rxd, Tx+ Out Rx+

AT Commands

“Setting the OMEGA DIP Switch” on page 13).

To facilitate this connection, the OMEGA Marwell socket adapter comes with an RJ-11 extension cable. This cable lets you connect a DTE cable to the appropriate RJ-11 female jack, without having to insert the DTE cable into the modem enclosure.

Figure 1-1 on page 7 shows the location of these connectors. Figure 2-1 shows a close-up of the RJ-11 jack, with pin 1 identified. Table 2-4 lists the pin assignments for the RS-232 connector. Table 2-5 lists the pin assignments for the RS-485 connector.

PIN # 1

Figure 2-1. RJ-11 Jack

Table 2-4. RS-232 Connector Pin Assignments

RJ-11 Connector	Signal Name	Input /Output	DB-9 Pin Equivalent
1	DCD	OUT	1
2	RTS	IN	7
3	TXD	IN	3
4	CTS	OUT	8
5	RXD	OUT	2
6	SG	NA	5

Table 2-5. RS-485 Connector Pin Assignments

RJ-11 Connector	Signal Name	Input /Output	DB-9 Equivalent
1	Not Used
2	TX+	OUT	N/A
3	TX-	OUT	N/A
4	RX+	IN	N/A
5	RX-	IN	N/A
6	Not Used

Page 15