Telenetics CDMA manual Return Merchandise Authorization RMA Procedure

Page 32

Return Merchandise Authorization (RMA) Procedure

Before returning any Telenetics product, an RMA number must be obtained. Before asking for an RMA number, ascertain that the product was purchased from Telenetics. If you bought the product from a Distributor or Systems Integrator, the product should be returned to that vendor.

The most convenient method to obtain an RMA number for a product purchased from Telenetics is to send an email to support@telenetics.com. Information required must include

Your Company Name, address, the actual address that we would use to return the product to you. Please include any Mail Stop or specific delivery information. The City, State, and zip code are all required. Your phone and FAX numbers. Your email address.

If the above information is on your letterhead, that format is acceptable.

For each item you wish to return: List the product model number, usually found on the serial number tag, the serial number for each item you wish to return, a description of the problem you are encountering, and the cause of the problem (if known).

A product support specialist may call to verify that the product is properly installed or may ask you to perform tests to insure that the product has actually failed. After review of the problem, an RMA number will be assigned, you will be notified by email or FAX.

The product must be properly packed and returned to:

Telenetics

25111 Arctic Ocean

Lake Forest, CA 92630

The RMA number must be legibly displayed on the shipping carton.

No RMAs will be issued without a product review, Telenetics will not be responsible for any product returned without an RMA number.

In the near future the RMA form will be available on our Web site Telenetics.com/support/rma. Fill in all blanks and click on the “Submit” button.

If you think the product may be out of warranty, include a method of payment for repairs, either a Purchase Order number, or Credit card number, Card Holder Name, Date of Expiration on the RMA request. Repairs currently require 5 – 10 working days, and are returned UPS second day air.

Page 32

Image 32
Contents Omega Cdma Modem User’s Guide Important Notice FCC Part 15 EMI Statement FCC Radiation Exposure StatementFCC ID N7NSB555 Contents Chapter Introduction ModelsIntroduction FeaturesOptions Hardware Features InstallationType II Omega Cdma Modem Type II Omega Cdma Modem with Marwell Socket Adapter Chapter Installation Installation SummaryObtaining Cellular Telephone Service AT CommandsUnpacking Your Hardware Items Supplied by the UserAttaching Mounting Feet stand-alone Omega Cdma Modem Installing the Optional 8-Port RS-232 ModulePower Supply Connections Setting the Omega DIP Switch Omega Cdma Modem Switch Settings DescriptionDTR Dial Enable AT Commands DTE Baud Rate Switch Baud Rate bpsAttaching a DTE Cable OFFDCD OUT RTS TXD CTS RXD TX+ OUT RX+Configuring the Omega Cdma Modem Powering-up the ModemCall Answer Testing LEDs Indicating Modem Control Signals SW5 on DTE SignalLEDs LEDs Indicating Rssi SW5 OFFChapter Troubleshooting Problem SolutionAppendix a AT Commands Table A-1. Basic AT Commands Parameter Description CommandString default is 2 seconds Table A-3. Basic Action Commands Parameter DescriptionReset CLIENT=CLIENT? DTRAT Command Parameter Description ~NAMLCK ~NAMVAL?0~NAMVAL= Write Account Activation DataAT Command Line Syntax Table A-6. Telenetics-Proprietary CommandsResult Codes Only until the next reset or power off Using S-RegistersAT Commands Table A-7. Result Codes Number Word Description Page Installation Appendix B Installing the 8-port RS-232 Module Verifying Package Contents Installing the 8-port RS-232 Module Eight-Port Module PortsLimited Product Warranty Return Merchandise Authorization RMA Procedure