Telenetics CDMA manual String default is 2 seconds

AT Commands

		Table A-2. S-register Commands
AT	Parameter	Description
Command
S	0	Auto-answer (0-255; 0 disables auto-answer)
	3	Carriage Return character (default is 13 ASCII)..
	4	Line Feed character (default is 10 ASCII)
	5	Backspace character (default is 8 ASCII).
	6	Pause duration (2-10 seconds) before blind dialing (default is 2 seconds).
	7	Duration (1-255 seconds) to complete an end-to-end data connection
		(default is 50 seconds).
	8	Duration (0-255 seconds) to pause when a comma is encountered in a Dial
		string (default is 2 seconds).
	9	Carrier detect threshold, from 0-22 tenths of a second (default is 6).
	10	Number of tenths of a second (1-254) from carrier loss to disconnect
		(default is 14).
	11	DTMF tone duration and spacing, from 50-255 milliseconds (default is 95).

Table A-3. Basic Action Commands

AT	Parameter	Description
Command
A		Go off-hook, answer incoming call.
D	0 to 9, *, #, A, B, C, D,	Dial digits that follow the D command.
	T, P, W, @, !, $, ;, ,
HO		Disconnect and return to Command Mode.
O		Return to Online mode from Command Mode.
A/		Repeat last command

Page 21