Telenetics CDMA manual AT Command Parameter Description

		AT Commands
	Table A-4. Cellular CDMA Commands
AT Command	Parameter	Description
*RPASS= [string]		Set the remote user login password.
*RPASS?		Display the remote user login password.
*RSSI		Display the Received Signal Strength.
*RUSER= [string]		Set the remote login username.
*RUSER?		Display the remote login username.
*SIP= [xxx.xxx.xxx.xxx]		Set the remote server IP address.
*SIP?		Display the remote server IP address.
*T= [secs]		Set the maximum connection time.
*T?		Display the maximum connection time.
*UDP=	1	Enable UDP.
	0	Disable UDP.
*UDP?		Display UDP activation.
*VM= [config]		Set the default modem AT configuration.
*VM?		Display the default modem AT configuration.
*VT= [config]		Set the default transceiver configuration.
*VT?		Display the default transceiver configuration.
*W		Save the active configuration.
*WTCP=	1	Enable TCP waiting for ACK.
	0	Disable TCP waiting for ACK.
*WTCP?		Display the TCP waiting activation.
+CAD?		Query analog or digital service.
+CRC=<value>	0	Disable cellular result codes (default).
	1	Enable cellular result codes.
+CRM=<value>	0	Asynchronous data (default).
	1	Packet data service, relay layer transceiver interface.
	2	Packet data service, network layer transceiver interface
		PPP.
	3	Packet data service, network layer transceiver interface
		SLIP.
	4	STU-III service
+CQD=<value>	0	Ignored
	1-255	Release call after 5x<value> seconds elapse.
+CMIP?		Mobile station IP address
+CBIP?		Base station IP address
+CSS?		Identifies if mobile station is registered with A- or B-band,
		or not registered.
+CSQ?		Query Received Signal Quality
!RSSI?		Received line signal strength
!STATUS		Status of the OMEGA CDMA modem

Page 23