SSI America EPS2U manual Standby Outputs, W Load Ratings Split Plane

				SSI
			EPS2U Power Supply Design Guide, V2.1
	Table 16: 600 W Load Ratings – Split Plane
Voltage		Minimum Continuous	Maximum Continuous	Peak
+3.3 V		0.8 A	24 A
+5 V		0.5 A	20 A
+12V1		0 A	12 A	15 A
+12V2		0 A	12 A	15 A
+12V3		0.9 A	14 A
+12V4		0.1 A	8.0 A	13 A
-12 V		0 A	0.5 A
+5 VSB		0.1 A	2.0 A

1.Maximum continuous total DC output power should not exceed 600 W.

2.Maximum continuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed 140 W.

3.Maximum peak total DC output power should not exceed 710 W.

4.Peak power and current loading shall be supported for a minimum of 1 second.

5.Maximum combined current for the 12 V outputs shall be 42 A.

6.Peak current for the combined 12 V outputs shall be 51 A.

Table 17: 650 W Load Ratings – Split Plane

Voltage	Minimum Continuous	Maximum Continuous	Peak
+3.3 V	0.8 A	24 A
+5 V	0.5 A	24 A
+12V1	0 A	12.5 A	15 A
+12V2	0 A	12.5 A	15 A
+12V3	0.9 A	14 A
+12V4	0.1 A	8.0 A	13 A
-12 V	0 A	0.5 A
+5 VSB	0.1 A	2.0 A

1.Maximum continuous total DC output power should not exceed 650 W.

2.Maximum continuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed 140 W.

3.Maximum peak total DC output power should not exceed 770 W.

4.Peak power and current loading shall be supported for a minimum of 1 second.

5.Maximum combined current for the 12 V outputs shall be 45 A.

6.Peak current for the combined 12 V outputs shall be 54 A.

6.4.1Standby Outputs

STATUS

Required

The 5 VSB output shall be present when an AC input greater than the power supply turn on voltage is applied.

- 18 -