Teac P-55 instruction manual Status AUX Connector optional

Page 8

SECTION 3 : Identifying the Parts

15

12

18

12STATUS AUX Connector (optional)

13

14

16

17

This connector allows connection of the P-55 to an external device for the combined use with the robotics system. *Please contact us before use. (See SECTION 20 : Contact Information.)

13Parallel Port Multi-connector

14

15

16

This provides a parallel interface between your PC's printer port and the P-55 over the supplied printer cable.

Intake Fan (with filter)

This opening is for dropping the temperature inside the unit. Obstructing this opening may result in failures. Place the unit in an adequate location.

(See SECTION 4 : Choosing Adequate Location.)

Power Switch

This rocker switch turns power to the unit on and off. The unit powers up when pressing “ ” end of the switch, and powers down when pressing “ ” end.

(The internal cooling fan stops only in about 10-20 minutes after the unit switches into the Standby ode.)

AC Power Input Socket

Plug in here the power cable. (To drop the temperature inside the unit, the fan continues to rotate for about 10 to 20 minutes after switching off the power. For this interval of time, do not unplug the power cable.)

NOTE

The product for U.S.A., Canada and Europe does not include a power cable. See SECTION 8 : Connections.

17

18

Heater Voltage Selector Switch

This selects the voltage to supply to the internal heater.

For U.S.A. and Canada

The Heater Voltage Selector Switch is preset to “100-120V” at the factory. Selecting a wrong voltage may cause the printer to malfunction.

For Europe

The Heater Voltage Selector Switch is preset to “220-240V” at the factory. Selecting a wrong voltage may cause the printer to malfunction.

USB 2.0 Compatible Connector (Hi-Speed support) (*Note) USB 2.0 interface is compatible with USB 1.1.

To take advantage of the USB 2.0 high speeds, your PC needs to have USB 2.0 capability.

8

Image 8

Contents Disc Label Printer Table of Contents Important Safety Instructions Important Safety Instructions Features IntroductionUnpacking and Inspection Blank media CD-R 10-pack of discs Printer cableIdentifying the Parts Exhaust Fan on the right sideStatus AUX Connector optional Choosing Adequate Location Choosing Adequate Location Installing/Removing Shipping Protection Materials Setting the Parallel Interface Mode on the PC Installing the Label Editor SetupInstalling the Label Editor Connecting PC to P-55 ConnectionsA C Control Panel Features Selecting USB / Parallel Port L e c tIndicating Operation State Preheating heatrollerInstalling the Printer Driver Window Please wait while the wizard installsStandard Mode Error Messages Explained Error Message Description Corrective ActionFor the contact details, see Contact If the shaft is erroneously protruding, place the ribbon Check the shaft flange How to Load a Ribbon Loading RibbonsLoading Ink Ribbon Loading Ribbons Loading Re-transfer Ribbon Turn the take-up shaft clockwise to take up ribbon slack Loading Ribbons Checking the Remaining Ribbon Amount Guide Pins Loading Print MediaGetting Label Print Job Started Getting Label Print Job StartedGetting Label Print Job Started Click OK When the process is completed, the tray slides out Print to file Supplementary explanationCorrecting for displacement and hue shift between colors Correcting for displacementClick Repeat on the Maintenance tab Getting Label Print Job Started Correcting for hue shift between colors Correcting for aspect ratio Getting Label Print Job Started Beware Point to Start, Settings and then Printers Removing Disc Label Editor and Printer DriverSelect File and then Server Properties Removing Disc Label Editor and Printer Driver Select Add or Remove Programs Removing Disc Label Editor and Printer Driver Uninstalling the P-55 related information Maintenance Cleaning the cooling fan filter every half year Periodic Checks and Maintenance by Service PersonnelShipping Ribbon setGeneral SpecificationsPrinter External Dimensions Options Technical Support Teac America, Inc. Dspd Technical Support Contact InformationProduct Information Teac America, Inc