Teac P-55 instruction manual Turn the take-up shaft clockwise to take up ribbon slack

Page 30

SECTION 12 : Loading Ribbons

4) Place the re-transfer ribbon with the supply shaft on the left and the take-up shaft on the right, and their protrusions facing you and their openings facing away from you.

5) Insert the open end of the take-up shaft into the hole provided in the cartridge (for ease of work, we recommend holding the shaft by inserting your index finger into its open end), and snap the protrusion at the other end of the shaft into the cut-off in the cartridge.

6) In a similar way, put the supply shaft into the re-transfer ribbon cartridge.

7) Turn the take-up shaft clockwise to take up ribbon slack.

NOTE

If you perform the next step without taking up ribbon slack, there is a chance that the ribbon might be broken.

8) Mount the re-transfer ribbon cartridge in the P-55 itself.

When mounting the ribbon cartridge, push it directly and slowly. If you try to force it in slantwise, there is a chance that the ribbon might be broken. If the ribbon clogs somewhere, take out the cartridge, take up ribbon slack again, and slowly re-insert the cartridge.

30

Image 30

Contents Disc Label Printer Table of Contents Important Safety Instructions Important Safety Instructions Features IntroductionUnpacking and Inspection Blank media CD-R 10-pack of discs Printer cableIdentifying the Parts Exhaust Fan on the right sideStatus AUX Connector optional Choosing Adequate Location Choosing Adequate Location Installing/Removing Shipping Protection Materials Setting the Parallel Interface Mode on the PC Installing the Label Editor SetupInstalling the Label Editor Connecting PC to P-55 ConnectionsA C Control Panel Features Selecting USB / Parallel Port L e c tIndicating Operation State Preheating heatrollerInstalling the Printer Driver Window Please wait while the wizard installsStandard Mode Error Messages Explained Error Message Description Corrective ActionFor the contact details, see Contact If the shaft is erroneously protruding, place the ribbon Check the shaft flange How to Load a Ribbon Loading RibbonsLoading Ink Ribbon Loading Ribbons Loading Re-transfer Ribbon Turn the take-up shaft clockwise to take up ribbon slack Loading Ribbons Checking the Remaining Ribbon Amount Guide Pins Loading Print MediaGetting Label Print Job Started Getting Label Print Job StartedGetting Label Print Job Started Click OK When the process is completed, the tray slides out Print to file Supplementary explanationCorrecting for displacement and hue shift between colors Correcting for displacementClick Repeat on the Maintenance tab Getting Label Print Job Started Correcting for hue shift between colors Correcting for aspect ratio Getting Label Print Job Started Beware Point to Start, Settings and then Printers Removing Disc Label Editor and Printer DriverSelect File and then Server Properties Removing Disc Label Editor and Printer Driver Select Add or Remove Programs Removing Disc Label Editor and Printer Driver Uninstalling the P-55 related information Maintenance Cleaning the cooling fan filter every half year Periodic Checks and Maintenance by Service PersonnelShipping Ribbon setSpecifications PrinterGeneral External Dimensions Options Contact Information Product Information Teac America, IncTechnical Support Teac America, Inc. Dspd Technical Support