Teac P-55 instruction manual Check the shaft flange

Page 25

SECTION 11 : Error Messages Explained

Note 5		Check the shaft flange
The COLOR and PHOTO ribbon shafts are of different		for dirt.
colors so that the printer can identify the two ink ribbons.

The PHOTO ink ribbon has a white shaft and the shaft
flange may get dirty depending on the environment. If the
PHOTO ribbon shaft has some dirt on the flange, the
printer may identify such a ribbon as COLOR ribbon by
mistaking the dirt for black from a COLOR ribbon shaft. If
the message “ERROR Wrong Ribbon Set” is displayed
when the correct set of PHOTO ink and transfer ribbons
are loaded, check the flange at the protrusion of the ribbon
shaft for dirt.
If you see any dirt on the protrusion, wipe it off.
*Do not use benzine, thinner, or any other equivalents as a
cleaning agent.	Note 6
	Note 6

How to mount the disc adapter

1)Set the slide switch on the front of the tray drawer to the RELEASE position.

2)Snap the protrusion of the adapter into the cut-out in the tray, as shown below.

3)Make sure that the adapter firmly sits on the table and then lock the adapter in place by setting the slide switch to the LOCK position.

Mounting Disc Adapter-1

Protrusion

Disc adapter

Cut-out

Tray

Mounting Disc Adapter-2

25

Image 25

Contents Disc Label Printer Table of Contents Important Safety Instructions Important Safety Instructions Introduction FeaturesBlank media CD-R 10-pack of discs Printer cable Unpacking and InspectionExhaust Fan on the right side Identifying the PartsStatus AUX Connector optional Choosing Adequate Location Choosing Adequate Location Installing/Removing Shipping Protection Materials Setting the Parallel Interface Mode on the PC Setup Installing the Label EditorInstalling the Label Editor Connections Connecting PC to P-55A C Control Panel Features L e c t Selecting USB / Parallel PortPreheating heatroller Indicating Operation StateWindow Please wait while the wizard installs Installing the Printer DriverStandard Mode Error Message Description Corrective Action Error Messages ExplainedFor the contact details, see Contact If the shaft is erroneously protruding, place the ribbon Check the shaft flange Loading Ribbons How to Load a RibbonLoading Ink Ribbon Loading Ribbons Loading Re-transfer Ribbon Turn the take-up shaft clockwise to take up ribbon slack Loading Ribbons Checking the Remaining Ribbon Amount Loading Print Media Guide PinsGetting Label Print Job Started Getting Label Print Job StartedGetting Label Print Job Started Click OK When the process is completed, the tray slides out Supplementary explanation Print to fileCorrecting for displacement Correcting for displacement and hue shift between colorsClick Repeat on the Maintenance tab Getting Label Print Job Started Correcting for hue shift between colors Correcting for aspect ratio Getting Label Print Job Started Beware Removing Disc Label Editor and Printer Driver Point to Start, Settings and then PrintersSelect File and then Server Properties Removing Disc Label Editor and Printer Driver Select Add or Remove Programs Removing Disc Label Editor and Printer Driver Uninstalling the P-55 related information Maintenance Periodic Checks and Maintenance by Service Personnel Cleaning the cooling fan filter every half yearRibbon set ShippingPrinter SpecificationsGeneral External Dimensions Options Product Information Teac America, Inc Contact InformationTechnical Support Teac America, Inc. Dspd Technical Support