Teac P-55 instruction manual For the contact details, see Contact

SECTION 11 : Error Messages Explained

Error Message	Description			Corrective Action
ERROR	The type of ribbon installed in theP-55			Replace the current ribbon with the same type of
	is different from the	type	of ribbon
RBN-IMG Mismatch				ribbon as the one specified in the print data (*2) and try
	specified in the print	data	(*2) sent
(*1)				printing again.
	from your computer.
ERROR	Print data (*2) with unidentifiable
IMG Type too Old	ribbon type have been sent to the			Create print data (*2) using the latest printer driver.
(*1)	P-55.
				You need to resend setdata to your P-55. To do so,
				contact our service.
ERROR	Error occurred in the setdata that had			(For the contact details, see SECTION 20 : Contact
Invalid Setdata	been internally looked up during the			Information.)
(*1)	printer startup.
				To clear the error message, open and then close the
				side door. The printer is back in “Ready.”

(*1)---This error is indicated by the firmware Ver51.34 or later versions only.

(*2)---Print data is the file (PRN file (*3)) created using the function “Print to file” or the data to be output to a printer.

(*3)---For details on PRN file, see 9) “Print to file” of SECTION 14 : Getting Label Print Job Started.

23