Teac P-55 instruction manual Click Repeat on the Maintenance tab

Page 40

SECTION 14 : Getting Label Print Job Started

4)Place a print medium into the P-55 and click Print next to Positioning pattern on the Maintenance tab.

5)The P-55 starts printing the first test pattern.

*The first test pattern is printed as shown on the left.

6)Take out the medium from the tray. Then, with the medium rotated by 180 degrees, place the medium back into the tray so that the two black printed areas on the medium are set toward the printer side and aligned horizontally as shown by the thick arrows.

*Move the medium to the right as shown by the red thin arrows to bring the hold pins located in the center of the tray into contact with the left side of the center spindle hole of the medium so that the hold pins and the black bars marked on the medium are aligned vertically as shown.

7)Click Repeat on the Maintenance tab.

* The second test pattern is printed as shown on the left.

40

Image 40

Contents Disc Label Printer Table of Contents Important Safety Instructions Important Safety Instructions Features IntroductionUnpacking and Inspection Blank media CD-R 10-pack of discs Printer cableIdentifying the Parts Exhaust Fan on the right sideStatus AUX Connector optional Choosing Adequate Location Choosing Adequate Location Installing/Removing Shipping Protection Materials Setting the Parallel Interface Mode on the PC Installing the Label Editor SetupInstalling the Label Editor Connecting PC to P-55 ConnectionsA C Control Panel Features Selecting USB / Parallel Port L e c tIndicating Operation State Preheating heatrollerInstalling the Printer Driver Window Please wait while the wizard installsStandard Mode Error Messages Explained Error Message Description Corrective ActionFor the contact details, see Contact If the shaft is erroneously protruding, place the ribbon Check the shaft flange How to Load a Ribbon Loading RibbonsLoading Ink Ribbon Loading Ribbons Loading Re-transfer Ribbon Turn the take-up shaft clockwise to take up ribbon slack Loading Ribbons Checking the Remaining Ribbon Amount Guide Pins Loading Print MediaGetting Label Print Job Started Getting Label Print Job StartedGetting Label Print Job Started Click OK When the process is completed, the tray slides out Print to file Supplementary explanationCorrecting for displacement and hue shift between colors Correcting for displacementClick Repeat on the Maintenance tab Getting Label Print Job Started Correcting for hue shift between colors Correcting for aspect ratio Getting Label Print Job Started Beware Point to Start, Settings and then Printers Removing Disc Label Editor and Printer DriverSelect File and then Server Properties Removing Disc Label Editor and Printer Driver Select Add or Remove Programs Removing Disc Label Editor and Printer Driver Uninstalling the P-55 related information Maintenance Cleaning the cooling fan filter every half year Periodic Checks and Maintenance by Service PersonnelShipping Ribbon setPrinter SpecificationsGeneral External Dimensions Options Product Information Teac America, Inc Contact InformationTechnical Support Teac America, Inc. Dspd Technical Support