Taylor CONROE1333-DVI/H Dram CAS# Latency, Dram RAS# to CAS# Delay, Dram RAS# Precharge

Page 33

the items “DRAM RAS# to CAS# Delay”, “DRAM RAS# Precharge”, and “DRAM RAS# Activate to Precharge” appear to allow you adjusting them.

DRAM CAS# Latency

Use this item to adjust the means of memory accessing. Configuration options are [6], [5], [4], [3], and [Auto].

DRAM RAS# to CAS# Delay

This controls the latency between the DRAM active command and the read / write command. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks], and [6 DRAM Clocks].

DRAM RAS# Precharge

This controls the idle clocks after a precharge command is issued. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks], and [6 DRAM Clocks].

DRAM RAS# Activate to Precharge

This controls the number of DRAM clocks for TRAS. Configuration options: [4 DRAM Clocks], [5 DRAM Clocks], [6 DRAM Clocks], [7 DRAM Clocks], [8 DRAM Clocks], [9 DRAM Clocks], [10 DRAM Clocks], [11 DRAM Clocks], [12 DRAM Clocks], [13 DRAM Clocks], [14 DRAM Clocks], and [15 DRAM Clocks].

Primary Graphics Adapter

This item shows the primary graphics adapter. The default value is [PCI]. Configuration options: [Onboard], [PCI] and [PCI Express].

Internal Graphics Mode Select

If you select [Auto], the onboard VGA will be automatically disabled when you install VGA card; the onboard VGA will be enabled without the installa- tion of any add-on VGA card. If you select [Enabled, 8MB] or [Enabled, 1MB], the onboard VGA will be enabled.

DVMT Mode Select

Use this option to adjust DVMT mode. Configuration options: [Fixed Mode], [DVMT Mode] and [Fixed+DVMT Mode]. The default value is [DVMT Mode]. DVMT (Dynamic Video Memory Technology) is an architecture that offers breakthrough performance for the motherboard through efficient memory utilization. In Fixed mode, a fixed-size fragment of the system memory is allocated to the graphics core. In DVMT mode, the graphics driver allocates memory as needed for running graphics applications and is cooperatively using this memory with other system components. In Fixed+DVMT mode, the graphics processor gets a fixed-size chunk of 64MB of memory and up to 64MB of dynamically-allotted memory. This mode guarantees that at least 64MB of memory is available to the graphics core, with a possibility to increase this amount to 128MB, if necessary.

3 3

Image 33
Contents ConRoe1333-DVI/H Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Bios Feature ConnectorSee Caution Support CDDDRII533*, DDRII667 CPU 24.4cm 9.6 Motherboard LayoutTable for Audio Output Connection HD 8CH I/OScrew Holes Pre-installation PrecautionsCPU Installation Page Installation of CPU Fan and Heatsink Dual Channel Memory Configurations Installation of Memory Modules DimmNotch break Installing a DimmExpansion Slots PCI, Hdmr and PCI Express Slots Installing an expansion cardDVI-D connector DVI-D monitor DVI Graphics-HDCP Card Installation GuideDVI Graphics-HDCP card DVI Graphics-HDCPHdcp Function with DVI Graphics-HDCP Card What is HDCP?PS2USBPWR1 Jumpers SetupIDE1 Onboard Headers and ConnectorsUSB 2.0 Headers Chassis Speaker Header Serial port Header Western Digital Sataii Hard Disk Setup GuideDriver Installation Guide Hdmr Card and Driver InstallationUntied Overclocking Technology Bios Menu Bar Navigation Keys Main ScreenAdvanced Screen CPU Configuration Ratio Status Ratio Cmos SettingRatio Actual Value Enhance Halt StateConfigure Dram Timing by SPD Chipset ConfigurationIntel R SpeedSteptm tech Dram FrequencyInternal Graphics Mode Select Dram RAS# to CAS# DelayDvmt Mode Select Dram CAS# LatencyOnBoard HD Audio DVMT/FIXED MemoryFront Panel Control CD-InAcpi Configuration ATA/IDE Configuration IDE ConfigurationIDE Device Configuration ATA/IDE Configuration EnhancedPIO Mode LBA/Large ModeDMA Mode Block Multi-Sector TransferPCI Latency Timer PCIPnP ConfigurationA.R.T Bit Data TransferSuper IO Configuration Floppy ConfigurationOnBoard Floppy Controller Serial Port AddressUSB Configuration Hardware Health Event Monitoring Screen Target CPU Temperature CCPU Quiet Fan Tolerance CBoot Settings Configuration Boot ScreenBoot From Onboard LAN Boot Up Num-LockMain Advanced Monitor Boot Change Supervisor PasswordSecurity Screen Exit Screen Load Optimal DefaultsSave Changes and Exit Discard Changes and ExitSupport CD Information Install Operating SystemRunning The Support CD Drivers Menu