kernel version 2.4.18 or higher. This option will be hidden if the installed CPU does not support
Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology. Processor can switch between multiple frequency and voltage points to enable power savings. The default value is [Auto]. Configuration options: [Auto], [Enabled] and [Disabled]. If you install Windows® XP and select [Auto], you need to set the “Power Schemes” as “Portable/Laptop” to en- able this function. If you install Windows® VistaTM and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel (R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power supplies. Please set this item to [Disable] if above issue occurs.
3.3.2 Chipset Configuration
BIOS SETUP UTILITY
Advanced |
|
|
|
| |
Chipset Configuration |
|
| Options | ||
|
|
| |||
DRAM Frequency | [Auto] | Auto |
|
| |
Flexibility Option | [Disabled] |
|
| ||
200MHz | (DDRII400) | ||||
Configure DRAM Timing by SPD [Enabled] | |||||
266MHz | (DDRII533) | ||||
DRAM CAS# Latency | [Auto] | ||||
333MHz | (DDRII667) | ||||
|
| ||||
Primary Graphics Adapter | [PCI] |
|
|
| |
Internal Graphics Mode Select | [Auto] |
|
|
| |
DVMT Mode Select | [DVMT Mode] |
|
|
| |
DVMT/FIXED Memory | [Maximum DVMT] |
| Select Screen | ||
|
|
| |||
OnBoard HD Audio | [Auto] |
| Select Item | ||
Front Panel | [Enabled] | + - | Change Option | ||
[Enabled] | F1 | General Help | |||
OnBoard Lan | [Enabled] | F9 | Load Defaults | ||
PCI Fix Function | [Enabled] | F10 | Save and Exit | ||
ESC | Exit | ||||
|
| ||||
VCCM Voltage | [Auto] |
|
|
| |
v02.54 (C) Copyright
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may also select other value as operating frequency: [200MHz (DDRII 400)], [266MHz (DDRII 533)], [333MHz (DDRII 667)]. The configuration options may change according to the corresponding FSB frequency of the CPU you adopt.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled].
Configure DRAM Timing by SPD
3 2
Select [Enabled] will configure the following items by the contents in the SPD (Serial Presence Detect) device. If you select [Disabled], you will find