Taylor CONROE1333-DVI/H user manual USB Configuration

Parallel Port Address

Use this item to set the address for the onboard parallel port or disable it. Configuration options: [Disabled], [378], and [278].

Parallel Port Mode

Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, “EPP Version”. Configuration options: [Normal], [Bi-Directional], and [ECP+EPP].

EPP Version

Use this item to set the EPP version. Configuration options: [1.9] and [1.7].

ECP Mode DMA Channel

Use this item to set the ECP mode DMA channel. Configuration options: [DMA0], [DMA1], and [DMA3].

Parallel Port IRQ

Use this item to set the IRQ for the parallel port. Configuration options: [IRQ5] and [IRQ7].

3.3.8 USB Configuration

	BIOS SETUP UTILITY
Advanced
USB Configuration		To enable or disable
		the onboard USB
USB Controller	[Enabled]	controllers.
USB 2.0 Support	[Enabled]
Legacy USB Support	[Disabled]
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this item to enable or disable the support to emulate legacy I/O devices such as mouse, keyboard,... etc. Or you may select [Auto] so that the system will start to auto-detect; if there is no USB device connected, “Auto” option will disable the legacy USB support.

4 0