Uniden UBC 120XLT manual Programming Channels, Programming By Manual Entry, Selecta frequency

Page 16

Programming Channels

Before you can scan, you must program the channels within a bank. You can store one frequency per channel, up to 100 channels.

Note: If appears on the display (keypad Locked), unlock the keypad by pressing and holding (LocK)until

disappears and you hear two beeps.

There are two ways to program a channel:

.	Manually select		a channel and frequency,	using the
	numeric	keypad.
.	Search	a band	to find an active frequency,	and then
	directly	store it	into a selected channel. (See the
	Search	section,	page 21.)

Programming By Manual Entry

1.Selecta frequency.

Example: Program 125.2500 MHz into Channel 18.

2.Make sure the scanner is in the SCAN Mode. If it is in

the SRCH Mode, press @.

3.Press ~ to stop scanning.

4.Press CDQ)@ to go to Channel 18.

5.Enter the frequency number using the numeric keypad. (Be sure to include the decimal point.) As soon as you enter the first digit of the frequency, the channel number begins ,to blink.

eD CD CD 0 CD CD.

BANK \ ~I

-:lB~725.2500

I 1\ HOLD

If you make a mistake and want to clear the entry, press 0 twice and re-enter the frequency.

14

Image 16

Contents UBC 120XLT Precautions Table of Contents What is Searching? About Your New USC 120XLTTypes of Communication BeltClip Twin Turbo Scan & Search -This lightning-fast Feature HighlightsPriority Channels You can assign one Priority Front View Squelch ControlPriorityChannelIndicator- Pappears Indicates Scan ModeIndicates Search Flashes When in Turb Arch Mode Ica es Priority Scan ModeScan Mode. PR~ears on the display. While Eys toCD 1 1 Charging the Battery Pack SetupMounting the Flexible Antenna Place the Belt Clip on Mounting area on Back Installing the Belt Clip ~ ~ Operation Overview 1LfSCRN Search The Search function is different from ScanProgramming Channels Programming By Manual EntrySelecta frequency Press ~ to stop scanningTo program another channel, repeat the above procedures Deleti ng a Stored Freq uencyScanning Scan, press @ again. The PRIindicator will disappear from To activatePriorityScan,press@. The PRIindicatorwillPress~ Locking Out Chan nels During scanning, you will not see locked~Weather Channel Scanning Press DAT~ to activate the Data Skip feature. The DA1A DAT~again. The DA1A indicator disappears from the displaySearch Frequency Skip Programming With SearchCare and Maintenance Replacing the Battery PackCleaning FOOlBirdies Proper Care of Your ScannerTroubleshooting ProblemsolutionYour UBC 120XL T are available from your local Uniden LC-120 UA-502 UA-502A BCK-150 OMBC120Technical Specifications Warrant~ P700 888.8888AIRWX Unidl!n@