To access a specific channel:
1.Press~.
2.Enter the channel number using the numeric keys.
3.Press ~ again.
Priority Scan
The UBC 120XL T has 10 Priority Channels, 1 per Bank. |
| ||||
Initially, these are the first channel in each Bank. (e.g. |
| ||||
Channel 1, Channel 11, Channel 21, and so on.) The scanner |
| ||||
checks the Priority Channel(s) every 2 seconds during the |
| ||||
Scan cycle. If a transmission | is received, the | scanner will stop |
| ||
at that channel. | If the Priority | Channel in any | Bank is "locked |
| |
Out"',it will be skipped during scanning. |
|
| |||
You can move the Priority to any other channel in a Bank as |
| ||||
follows: |
|
|
| I | |
1. Go directly to that channel using any of the methods | |||||
| |||||
described | above. |
|
|
| |
2.Press and hold @ for at least 2 seconds. You will
hear a "beep", and P will appear on the display to the left of the new channel number. That channel will now
be the Priority Channel for that Bank. (The P will no longer appear for the previous Priority Channel.)
To activatePriorityScan,press@. The PRIindicatorwill .
appear at the bottom of the display. To deactivate Priority
Scan, press @ again. The PRIindicator will disappear from
the bottom of the display.
Delay
Normally the scanner will resume scanning when a transmission stops. If you want to remain on a channel until a responding transmission is received, activate the DELAY feature. This feature can be active in SCAN, SEARCH, and WEATHER Modes.
1.Press (DELAY)The. DLY indicator appears at the bottom of the display. The scanner will now pause 2 seconds after transmission stops before resuming scanning.
2.Press (DELAY)again to deactivate Delay. The DLY indicator disappears from the bottom of the display.
17