Uniden UBC 120XLT manual Troubleshooting, Problemsolution

Page 27

Troubleshooting

If your UBC 120XLT is not performing properly, try the steps listed below.

PROBLEMSOLUTION

Scanner won'twork.

Check the power connections.

Check the volume and squelch.

Make sure the power switch is turned on.

Improper reception.

Scan won'tstop.

Check the antenna connection.

You may be in a fringe area. Reposition the scanner.

Adjust the Squelch Control.

Check the antenna connection.

It is possible that none of the programmed frequencies are active at the time.

Scan won'tstart.

Search won'tstart.

Keypad won'twork.

Make sure there are some			I
Make sure there are some
programmed channels.
Adjust	the Squelch	Control.
Adjust	the Squelch	Control.
Check the Keypad		Lock.

If you still cannot get satisfactory results and want additional

information, or to return the unit for service, please call or write to the Uniden Service Division. The address and

phone number are listed in the Warranty (at the end of this manual).

25

Image 27

Contents UBC 120XLT Precautions Table of Contents About Your New USC 120XLT What is Searching?Types of Communication BeltClip Feature Highlights Twin Turbo Scan & Search -This lightning-fastPriority Channels You can assign one Priority Squelch Control Front ViewIca es Priority Scan Mode PriorityChannelIndicator- PappearsIndicates Scan Mode Indicates Search Flashes When in Turb Arch ModeEys to Scan Mode. PR~ears on the display. WhileCD 1 1 Setup Charging the Battery PackMounting the Flexible Antenna Installing the Belt Clip Place the Belt Clip on Mounting area on Back~ ~ Operation Overview Search The Search function is different from Scan 1LfSCRNPress ~ to stop scanning Programming ChannelsProgramming By Manual Entry Selecta frequencyDeleti ng a Stored Freq uency To program another channel, repeat the above proceduresScanning To activatePriorityScan,press@. The PRIindicatorwill Scan, press @ again. The PRIindicator will disappear fromPress~ During scanning, you will not see locked~ Locking Out Chan nelsWeather Channel Scanning DAT~again. The DA1A indicator disappears from the display Press DAT~ to activate the Data Skip feature. The DA1AProgramming With Search Search Frequency Skip Replacing the Battery Pack Care and MaintenanceFOOl CleaningProper Care of Your Scanner BirdiesProblemsolution TroubleshootingLC-120 UA-502 UA-502A BCK-150 OMBC120 Your UBC 120XL T are available from your local UnidenTechnical Specifications Warrant~ P700 888.8888AIRWX Unidl!n@