Uniden UBC 120XLT manual Deleti ng a Stored Freq uency

Page 17

6.Press CD to store the entry. The channel number on the displaystops blinking.

BANK 2

18125.2500

AIR

HOLD

7.Ifthat frequency is already stored in another channel, you will hear a "beep", and the other channel number will appear on the display.

Ifyou want to store the frequency in the selected

channel (18) as well, press CD again. Or, press 0 twice and enter another frequency for the currently

selected channel. The channel number on the display

stops	blinking.	I
Note:	Any frequency already stored in any channel	I

will automatically be replaced by the new one.

8.If you try to enter a frequency that is outside of the 9 Bands, you will hear a "beep", and the word "Error" appears on the display.

BANK 2

18Error

HOLD

Press 0 twice and re-enter the correct frequency.

9.To program another channel, repeat the above procedures.

Deleti ng a Stored Freq uency

To delete a frequency from a channel:

1.Display the channel and frequency to be deleted.

2.Press CD on the numeric keypad.

3.Press CD. The current channel is erased, and the display shows 000.000.

Note: That channel will be skipped during scanning.

15

-. =

Image 17

Contents UBC 120XLT Precautions Table of Contents About Your New USC 120XLT What is Searching?Types of Communication BeltClip Priority Channels You can assign one Priority Feature HighlightsTwin Turbo Scan & Search -This lightning-fast Squelch Control Front ViewIndicates Scan Mode PriorityChannelIndicator- PappearsIndicates Search Flashes When in Turb Arch Mode Ica es Priority Scan ModeEys to Scan Mode. PR~ears on the display. WhileCD 1 1 Mounting the Flexible Antenna SetupCharging the Battery Pack ~ ~ Installing the Belt ClipPlace the Belt Clip on Mounting area on Back Operation Overview Search The Search function is different from Scan 1LfSCRNProgramming By Manual Entry Programming ChannelsSelecta frequency Press ~ to stop scanningDeleti ng a Stored Freq uency To program another channel, repeat the above proceduresScanning Press~ To activatePriorityScan,press@. The PRIindicatorwillScan, press @ again. The PRIindicator will disappear from During scanning, you will not see locked~ Locking Out Chan nelsWeather Channel Scanning DAT~again. The DA1A indicator disappears from the display Press DAT~ to activate the Data Skip feature. The DA1AProgramming With Search Search Frequency SkipReplacing the Battery Pack Care and MaintenanceFOOl CleaningProper Care of Your Scanner BirdiesProblemsolution TroubleshootingLC-120 UA-502 UA-502A BCK-150 OMBC120 Your UBC 120XL T are available from your local UnidenTechnical Specifications Warrant~ P700 888.8888AIRWX Unidl!n@