Uniden UBC 120XLT manual PriorityChannelIndicator- Pappears, Indicates Scan Mode

Page 9

c.	Memory Bank Numbers	- Each Memory
	Bank consists of 10 channels that you can
	select or deselect during scanning operation,
	using the numeric keypad. When you select a
	Bank, its number appears on the display. When
	you deselect a Bank, its number disappears		I
	from the display. When you press ~ to stop
	scanning, only the Bank of the current channel
	appear~

D.Low Battery Indicator - Appears on the display when the Battery Pack is Iow and needs recharging.

E.Frequency Indicator - 7-digits plus decimal

indicate the frequency being reqeived by the scanner.

F.Mode Indicators - (Only the active mode(s) are displayed during operation.)

DATJ( Indicates DATA SKIP activated

	during SEARCH.
SCN	Indicates SCAN Mode.
SRCH	Indicates SEARCH	e. Flashes

	when in TURB		ARCH Mode.
PRI	ica es PRIORITY SCAN Mode.
HOLD	IndicatesSCAN.HOLD or SEARCH.
	HOLD
DLY	Indicates	DELAY	is activated.
UO	In SCAN	Mode indicates the channel
	shown is "locked		Out".

In SEARCH Mode indicates the

frequency shown is "Locked Out".

WX Indicates WEATHER SCAN Mode.

G. ... Indicatesthekeypadislocked.

H.PriorityChannelIndicator- Pappears

when the scanner stops on a Priority Channel.

2.Press @ to start scanning all programmed channels

that are not locked out. (SCAN moves across the display during scanning.)

3.In SCAN Mode, press ~ to stop scanning. (HOLD appears on the display.) After you stop the scanner, press @ again to resume scanning.

7

Image 9

Contents UBC 120XLT Precautions Table of Contents About Your New USC 120XLT What is Searching?Types of Communication BeltClip Feature Highlights Twin Turbo Scan & Search -This lightning-fastPriority Channels You can assign one Priority Squelch Control Front ViewIndicates Scan Mode PriorityChannelIndicator- PappearsIndicates Search Flashes When in Turb Arch Mode Ica es Priority Scan ModeEys to Scan Mode. PR~ears on the display. WhileCD 1 1 Setup Charging the Battery PackMounting the Flexible Antenna Installing the Belt Clip Place the Belt Clip on Mounting area on Back~ ~ Operation Overview Search The Search function is different from Scan 1LfSCRNProgramming By Manual Entry Programming ChannelsSelecta frequency Press ~ to stop scanningDeleti ng a Stored Freq uency To program another channel, repeat the above proceduresScanning To activatePriorityScan,press@. The PRIindicatorwill Scan, press @ again. The PRIindicator will disappear fromPress~ During scanning, you will not see locked~ Locking Out Chan nelsWeather Channel Scanning DAT~again. The DA1A indicator disappears from the display Press DAT~ to activate the Data Skip feature. The DA1AProgramming With Search Search Frequency SkipReplacing the Battery Pack Care and MaintenanceFOOl CleaningProper Care of Your Scanner BirdiesProblemsolution TroubleshootingLC-120 UA-502 UA-502A BCK-150 OMBC120 Your UBC 120XL T are available from your local UnidenTechnical Specifications Warrant~ P700 888.8888AIRWX Unidl!n@