Uniden UBC 120XLT manual Technical Specifications

Page 29

Technical Specifications

Channels:

100

Banks:

Total 10 Banks

 

10 Channels each

WX:

7 Programmed Channels

Frequency Coverage

Steps

66.0 to 88 MHz (NFM)

5 kHz

108.00 to 137 MHz (AM)

12.5 kHz

137.00 to 144.00 MHz (NFM)

5 kHz

144.00 to 148.00 MHz (NFM)

5 kHz

148.00 to 174.00 MHz (NFM)

5 kHz

406.00 to 420.00 MHz (NFM)

12.5 kHz

420.00 to 450.00 MHz (NFM)

12.5 kHz

450.00 to 470.00 MHz (NFM)

12.5 kHz

470.00 to 512.00 MHz (NFM)

12.5 kHz

Scan Rate:

100 channels per sec. Max.

 

(Turbo SCAN Mode)

Search Rate:

Scan Delay: Audio Output:

Antenna:

Operating

Temperafure:

Size:

Weight:

Power

Requirements:

100 steps per sec. ~ormal SEARCH Mode)

300 steps per sec. (TURBO SEARCH Mode)

2 seconds

180 mW nominal into 8il internal speaker

30 mW nominal into 32Q stereo headphones

8mW nominal into 64Q supplied earphohe Rubber antenna included

-20°Cto +60°C

64 mm (W) x 45 mm (D) x 310 mm (H) (with antenna attached)

3579

4.8V DC (internal battery or AC Adaptor/ I Charger)

13.8V DC (with optional Cigarette Lighter Power Cord properly connected.)

Features, specifications, and availability of optional accessories are all subject to change without notice.

-27

Image 29
Contents UBC 120XLT Precautions Table of Contents About Your New USC 120XLT What is Searching?Types of Communication BeltClip Priority Channels You can assign one Priority Feature HighlightsTwin Turbo Scan & Search -This lightning-fast Squelch Control Front ViewIndicates Scan Mode PriorityChannelIndicator- PappearsIndicates Search Flashes When in Turb Arch Mode Ica es Priority Scan ModeEys to Scan Mode. PR~ears on the display. WhileCD 1 1 Mounting the Flexible Antenna SetupCharging the Battery Pack ~ ~ Installing the Belt ClipPlace the Belt Clip on Mounting area on Back Operation Overview Search The Search function is different from Scan 1LfSCRNProgramming By Manual Entry Programming ChannelsSelecta frequency Press ~ to stop scanningDeleti ng a Stored Freq uency To program another channel, repeat the above proceduresScanning Press~ To activatePriorityScan,press@. The PRIindicatorwillScan, press @ again. The PRIindicator will disappear from During scanning, you will not see locked~ Locking Out Chan nelsWeather Channel Scanning DAT~again. The DA1A indicator disappears from the display Press DAT~ to activate the Data Skip feature. The DA1AProgramming With Search Search Frequency SkipReplacing the Battery Pack Care and MaintenanceFOOl CleaningProper Care of Your Scanner BirdiesProblemsolution TroubleshootingLC-120 UA-502 UA-502A BCK-150 OMBC120 Your UBC 120XL T are available from your local UnidenTechnical Specifications Warrant~ P700 888.8888AIRWX Unidl!n@