Uniden BC245XLT manual Setup, Installing the Battery Pack

Page 15

Setup

These are helpful guidelines when using your new scanner:

If your scanner receives interference or electrical noise, move the scanner or its antenna away from

nthe source.

If you need to improve reception, use an optional antenna designed for multi-band coverage. (You can purchase this type of antenna at a local

nelectronics store.)

Use the included earphone or an optional stereo headset with proper impedance for private listening. Read the precautions on the inside front cover of this Guide.

Installing the Battery Pack

1.Open the cover.

2.Insert the battery pack.

3.Replace cover and press down until it clicks into place.

11

Image 15
Contents Channel Trunk Tracking Scanner Page Top View and Display Front View Contents Page MHz12.5kHz IntroductionImportant Notice Terminology What is Scanning?What is Searching? What is Trunk Tracking?Page Manual Channel Access Go directly to any channel Feature HighlightsPage Information on the Internet Where to Obtain More InformationIncluded with Your Scanner EarphoneInstalling the Battery Pack SetupCharging the Battery Pack Low Battery IndicatorAdapter Safety Feature Belt Clip Flexible AntennaSetting the Squelch Basic OperationTurn the Scanner On Keylock LCD Back LightAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningRF Attenuation Feature Delay in Scan or Search Mode Setting the Delay ModeChannel Lockout Delay in Manual ModeLockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Setting a Search Range SearchingTurbo Search Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Types of Trunking Systems Trunk TrackingPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Direct Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDSearching Tips Restore all IDsHoldnMode Channel Activity IndicatorsThen the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Location Care and MaintenanceCleaning General UseBirdies RepairsnImproperScannerwonítreceptionProblemwork TroubleshootingSystemprope rly Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden America Corporation One Year Limited WarrantyUniden America Corporation All rights reserved. UBZZ01301ZZ