Uniden BC245XLT manual Moving between Scan List Memories, Multi-Track

Moving between Scan List Memories

There are a number of ways to step and move through your Scan List memories:

1.Press repeatedly.

2.Or, Press , then press or .

3. Or, Press , Next press 0-9 (scan list number), then press 0-9 (memory position). For example. To move to Scan List 4, memory position 10, press:

, 4, 0,

Multi-Track

The BC 245XLT allows you to track more than one system at a time. Here are some highlights of this new feature:

1.You can actually track up to 10 trunking systems at one time!

2.You can trunk scan or search and scan conventional frequencies at the same time.

3.You can program conventional frequencies in the same bank as trunking systems. After the radio finishes checking a trunked system for activity, it will conventionally scan the other frequencies in the bank (remember, only trunking frequencies are programmed in TRUNK mode).

To scan a mix of trunking and conventional banks, select the banks you wish to be active with trunking off, then

press . The radio will instantly begin scanning. If you have not programmed a trunking bank with talk group ID’s, you will receive an ERROR message for that bank. You can switch to SEARCH mode and the scanner will search for any active ID’s on the system.

55