Restore all IDs
To unlock all locked out IDs at once, follow these steps:
1.Press and hold 
until you hear two short beeps.
2.Press 
to unlock all the IDs at once.
Note: If you unlock all the IDs, then the Scan List
Memory mode displays. Press 
to scan the IDs
stored in your Scan Lists or press 
to return to the Search mode. For information about Scan Lists see page 48.
3.Press 
to return to the Search mode.
Searching Tips
ID DelaynMode
Use the 
key to select the Delay mode if it’s not active. This mode holds an ID for 5 seconds while you wait for a reply. Other groups may use the system, but your scanner will only look for the ID in the display.
Note: If you consistently miss responses while in ID Delay mode, you may need to change the default system type or change the fleet map you’re using if you’re trying to track a Motorola Type I system. For Motorola Type II or EDACS, if you’re missing pieces of conversations, you’ve likely left out one or more of the frequencies used by
the system.
45