HoldnMode
Press 
to hold on a particular ID in the display. You can hold a specific talk group, such as fire department
nwhich frequency the group uses.
Press 
to continue searching the entire trunked system.
ID MonitornMode
If you press and hold 
for 2 seconds, until you hear two short beeps, you will select the ID Monitor mode. SEARCH begins flashing in the display, and all active talk group IDs begin to display in succession. You won’t hear conversations in this mode, but this is an excellent way to determine which talk groups are the most active.
Note: Locked out IDs display during ID Monitor nmode with the L/0 icon turned on.
Press 
to continue searching the entire trunked system.
Channel Activity Indicators
The BC 245XLT has 20 Channel Activity Indicators to visually display a trunked system’s activity when you select delay, hold, scan etc. You’ll always know which frequencies are in use and how much communication traffic is occurring.
46