Uniden BC245XLT manual Programming a Fleet Map, Scanner returns to Programming Bank selecting mode

5.Press .

The scanner returns to Programming Bank selecting mode.

Note: You will now begin to see Type I Fleet-Subfleet IDs. For example, 100-12, 100-9, 000-12, 400-8, etc. See User Defined Fleet Maps in the Appendix for more information about Type I IDs.

How do you know if the preset map is correct? You’ll have to listen to see if you’re following complete conversations. If not, you should try another preset map.

Programming a Fleet Map

You may want to read User Defined Fleet Maps in the Appendix before programming a fleet map. It contains a detailed explanation of Scanner Fleet Map Programming, as well as a table listing the Fleet Map Size Codes.

1.Select the Trunking Programming mode and the bank you want to change.

2. Use or, to choose E1, and press .

3.Press.

4.Use or to choose USr.

5.Press .

6.Use or to select the size code for the first block.

58