Uniden BC245XLT manual Scanner to External Modem

Page 67

SmartScanner software. Run this program and it should automatically set the port setting for you (although you can override the settings). Make sure that you have a phone line plugged into the modem jack on the back of your PC and your scanner is connected to the serial port of the PC using the supplied cable.

To use the Remote (PC Control) mode, you must purchase third party software and use as directed. Make sure that your scanner is connected to the serial port of the PC using the supplied cable.

Scanner to External Modem

Plug the smaller end of the supplied RS232C cable into the remote port which is on the right side of the scanner.

Plug the other end of the cable (DB-9 serial connector) into the external modem. You may need a DB-9 to DB-25 null modem adapter, available at most computer stores. Of course, make sure your external modem is turned on. Make sure that you have a phone line plugged into the modem jack on the back.

Scanner to Scanner

Plug the smaller end of each of the supplied RS232C cables into the remote ports which are on the right sides of each of the two scanners.

Plug the other ends of the cables (DB-9 serial connector) together using a DB-9 to DB-9 null modem adapter, available at most computer stores.

63

Image 67

Contents Channel Trunk Tracking Scanner Page Top View and Display Front View Contents Page MHz12.5kHz IntroductionImportant Notice Terminology What is Scanning?What is Searching? What is Trunk Tracking?Page Manual Channel Access Go directly to any channel Feature HighlightsPage Information on the Internet Where to Obtain More InformationIncluded with Your Scanner EarphoneInstalling the Battery Pack SetupLow Battery Indicator Charging the Battery PackAdapter Safety Feature Belt Clip Flexible AntennaBasic Operation Setting the SquelchTurn the Scanner On LCD Back Light KeylockAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningRF Attenuation Feature Delay in Scan or Search Mode Setting the Delay ModeChannel Lockout Delay in Manual ModeLockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Searching Setting a Search RangeTurbo Search Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Types of Trunking Systems Trunk TrackingPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Direct Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDSearching Tips Restore all IDsHoldnMode Channel Activity IndicatorsThen the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Location Care and MaintenanceCleaning General UseBirdies RepairsnImproperScannerwonítreceptionProblemwork TroubleshootingSystemprope rly Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden America Corporation One Year Limited WarrantyUniden America Corporation All rights reserved. UBZZ01301ZZ