Menu for SmartScan
Press 
key and you can change several parameters used for SmartScan.
Transfer speed 300, 1200, 2400, (9600) bps
Flow control setting (Xon/Xoff), RTS/CTS, Off
Dial type(TONE), PULSE
Transfer Speed
You can choose the following transfer speeds.
300,1200,2400,(9600),14400 bps 9600 is the default.
Press 
to exit.
Flow Control
You can choose the following flow control settings.
Xon/Xoff is the default.
The initial display appears.
Press 
for RTS/CTS,
Press 
again for non flow control.
Press 
when desired setting is displayed.
Dial Type
You can choose the Dial Type setting.
Tone is set as a default.
You can change it to PULSE by pressing 
.
67